Metallics Spring Wing Toggle B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$75.50
Metallics Anchors Sprg Wing TogBt 3/16" #10 3"

Metallics Spring Wing Toggle Bolt Anchor 3/16" #10 3" Jar Pack, 100 Pack

(No reviews yet) Write a Review

Model: J1551
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$75.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Metallics Industries Spring Wing Toggle Bolt Anchor 3/16" #10 3" Jar Pack

Professional Hollow Wall Fastening Solution

The Metallics Industries Spring Wing Toggle Bolt Anchor delivers exceptional performance and reliability for hollow wall mounting applications. This professional anchor system provides dependable fastening solutions designed for professional contractors, electricians, and industrial technicians, offering the proven quality and precision engineering that professionals trust from a leading manufacturer of electrical hardware and industrial fasteners.

Professional Features & Benefits

Superior Holding Power

  • Spring Wing Design - Provides maximum holding strength in hollow walls with wings that spring open behind drywall for secure anchoring
  • 3/16" Bolt Diameter - #10 sizing offers optimal strength-to-size ratio for medium to heavy-duty mounting applications
  • 3" Length Configuration - Accommodates various wall thicknesses while providing adequate thread engagement for secure installation
  • Jar Pack Convenience - Professional packaging ensures organized storage and easy access for contractors and technicians

Professional Installation

  • Easy Installation Process - Spring-loaded wings collapse for insertion and automatically deploy behind wall surface
  • Versatile Wall Compatibility - Designed for drywall, plasterboard, and other hollow wall construction materials
  • Reliable Engagement - Wings provide positive feedback when properly seated behind wall surface

Technical Specifications

Bolt Diameter: 3/16", Thread Size: #10, Length: 3", Pack Type: Jar, Product Type: Spring Wing Toggle Bolt Anchor, Product Group: Fasteners, Product Subgroup: Anchors, Product Family: Electrical Supplies, Department: Electrical

Installation & Usage

  1. Drill appropriate diameter hole in wall surface to accommodate collapsed wing assembly
  2. Compress spring wings and insert toggle bolt through mounting hole and into wall cavity
  3. Push toggle bolt through wall until wings spring open behind wall surface
  4. Pull bolt back gently to ensure wings are properly seated against back of wall
  5. Thread bolt into wings while maintaining slight tension to keep wings engaged
  6. Tighten bolt to secure mounted item, ensuring proper compression without over-tightening

Professional Applications

Ideal for:

  • Electrical Installations - Mounting electrical boxes, conduit supports, and panel accessories in hollow walls
  • HVAC Systems - Securing ductwork supports, thermostats, and ventilation components to drywall surfaces
  • Plumbing Applications - Installing pipe supports, fixture brackets, and plumbing accessories in wall cavities
  • Construction Fastening - General construction mounting for brackets, supports, and hardware in hollow wall construction
  • Industrial Assembly - Equipment mounting and support installation in commercial and industrial facilities
  • Building Maintenance - Repair and replacement of wall-mounted components and fixtures
  • Hardware Mounting - Installing shelving brackets, equipment supports, and architectural hardware
  • Commercial Construction - Professional mounting solutions for office buildings, retail spaces, and institutional facilities

Spring Wing Toggle Advantage

The spring wing toggle design provides superior holding power compared to standard wall anchors by distributing load across a larger area behind the wall surface. The spring-loaded mechanism ensures consistent wing deployment and reliable engagement, making it ideal for applications requiring dependable hollow wall fastening with professional-grade holding strength.

Why Choose Metallics Industries Quality?

Metallics Industries' commitment to precision manufacturing ensures consistent spring wing operation and reliable bolt threading. Our quality materials and finishes provide dependable performance for contractors and industrial professionals, with comprehensive product testing and trusted solutions for electrical, plumbing, HVAC, and construction applications. Each anchor is engineered to meet the demanding requirements of professional installations.

Manufacturer Resources

Product Specs

Minimum Purchase:
50 units
Division:
Electrical H1
Pack Type:
Jar
Product Family:
Electrical Supplies
Sub Division:
Electrical-E H2
Product Type:
Anchors
Product Group:
Fasteners
Department:
Electrical
Product Subgroup:
Anchors

Metallics J1551 – Frequently Asked Questions

1) What size hole do I drill for a 3/16" #10 spring wing toggle bolt?
Drill the hole large enough to pass the wings while they are folded flat against the bolt, not just the 3/16 inch bolt itself. The Metallics J1551 toggle uses a spring wing that collapses for insertion and springs open in the cavity, so the hole has to clear the folded wing assembly. Fold the wings, measure across them, and match your bit to that. Drill only that size, since an oversized hole lets the wing pull through the drywall face.
2) Will a 3" toggle bolt work in 5/8" drywall or on a double-layer wall?
The 3 inch length is measured on the bolt, and that length has to cover the wall thickness, the thickness of whatever you are hanging, plus enough thread left inside the cavity for the wing to travel and seat. On single 1/2 or 5/8 inch drywall with a bracket, 3 inches leaves plenty. Double-layer board or a thick standoff bracket eats into it fast, so add up your stack first. What matters more is cavity depth: the wing needs room to swing fully open behind the board, so avoid spots where insulation, a stud face, or a backer blocks it.
3) Can I remove the bolt later and reuse the anchor?
No. Back the bolt out of a spring wing toggle and the wing drops loose into the wall cavity, so you lose the anchor and have to install a new one in a fresh hole. If you expect to take the mounted item down and put it back on the same holes, use a threaded-body anchor such as a toggle with a strap and plastic channel, or a metal self-drilling drywall anchor. For a permanent mount, the J1551 is the stronger choice because the wing spreads the load across the back of the board.
4) Is a spring wing toggle the right anchor for mounting an electrical box or conduit strap to drywall?
Yes for hollow wall work. The Metallics spring wing toggle is intended for drywall, plasterboard, and similar hollow wall construction, and mounting electrical boxes, conduit supports, and panel accessories is one of its named uses. It is not a masonry or solid-wall anchor, and it is not for a wall with no accessible cavity behind it. If you are fastening into concrete, block, or brick, you need a sleeve or wedge anchor instead. If the box lands on a stud, a wood screw straight into framing is better than any anchor.
5) How do I keep the toggle wings from spinning when I tighten the bolt?
Keep tension on the bolt the whole time. Push the toggle through until the wings snap open, then pull back on the bolt head so the wings pin against the back of the board, and hold that pull while you start threading. You will feel the wings bite and stop turning. If you let go, the wing rides free in the cavity and the bolt just spins. Snug it down firmly but stop there, since over-tightening crushes the board face and the anchor loses its bearing area.
6) Do I need washers with these toggle bolts?
The jar supplies the bolt and the spring wing only. If the item you are mounting has slotted or oversized holes, or you are hanging sheet metal like a duct strap or thermostat plate, add a flat washer under the head so the bolt does not pull through the part. That is a separate line item, not included with the anchors.
7) How many toggle bolts come in a jar and what's the thread size?
Each jar holds 100 assemblies, and the bolt is a #10 machine thread at 3/16 inch diameter, 3 inches long. The jar pack keeps the wings and bolts together on the truck rather than loose in a bin, which matters with this style because a wing separated from its bolt is scrap. Check that the bracket or strap you are hanging has clearance holes that pass a #10 bolt.
How fast can I get the Metallics J1551 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics J1551 come with a warranty?
Absolutely. The Metallics J1551 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics J1551?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics J1551 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!