Metallics MWDWW2141M Anchors W...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$51.03
$1.43

Metallics MWDWW2141M Anchors WDog 2-1/4 Wt Wh Ph St-zn (Box 1000)

(No reviews yet) Write a Review

Model: MWDWW2141M
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$51.03
$1.43
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Anchors WDog 2-1/4 Wt Wh Ph St-zn (Box 1000)

Manufacturer Resources

Product Specs

Division:
Electrical H1
Pack Type:
Box
Product Group:
Screws
Sub Division:
Electrical-E H2
Department:
Fasteners
Product Subgroup:
Wood and Construction Screws
Product Type:
Concrete Screw

Metallics MWDWW2141M – Frequently Asked Questions

1) What size and pack quantity do you get with the Metallics MWDWW2141M walldog anchors?
Model MWDWW2141M is a 2-1/4 inch walldog-style anchor screw with a white-painted Phillips head on a zinc-plated steel body, supplied in a box of 1000. One part number, one configuration, so there is nothing else to specify on the order.
2) Do walldog anchors need a plastic sleeve or plug in drywall?
No. A walldog is a one-piece threaded anchor screw, so the MWDWW2141M goes straight into the drilled hole in drywall or masonry without a separate plastic sleeve or lead plug. That is the point of the design: fewer parts to carry and a single driving step with a Phillips bit.
3) Is a 2-1/4 inch walldog long enough to reach a stud behind 1/2 inch drywall?
Yes. At 2-1/4 inches of overall length, the MWDWW2141M passes through 1/2 inch drywall plus a bracket or strap and still bites well over an inch into framing. If you are anchoring into hollow drywall with no stud behind it, the threads carry the load in the board itself, so keep the load light and spread the fixing points.
4) Are these zinc-plated anchors suitable for outdoor or damp locations?
Zinc plating on steel is a dry-location finish. The MWDWW2141M is fine for interior walls and ceilings, but for exterior, wet, or corrosive locations choose a stainless or hot-dip galvanized fastener instead.
5) Why is the head on these Metallics anchors painted white?
The white head lets the fastener disappear against white walls, trim, and ceilings. Electricians use these 2-1/4 inch white-head walldogs for surface-mounted raceway, conduit clips, low-voltage brackets, and panel or device trim where the screw head stays visible after install.
6) Can I buy the Metallics MWDWW2141M walldog anchors in a smaller count than 1000?
The MWDWW2141M is packaged as a box of 1000, which is the standard contractor bulk count for this anchor. There is no smaller pack under this part number.
How fast can I get the Metallics MWDWW2141M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics MWDWW2141M come with a warranty?
Absolutely. The Metallics MWDWW2141M is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics MWDWW2141M?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics MWDWW2141M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.