Arlington Industries

Non Metallic adjustable floor box. Brown with flip lids. Includes tamper resistant duplex receptacle, cover plate with gasket and Arlington NM94 connector and Arlington NM900 knockout plug.FLBAF101BR...

Non Metallic adjustable floor box. Black with flip lids. Includes tamper resistant duplex receptacle, cover plate with gasket and Arlington NM94 connector and Arlington NM900 knockout plug.FLBAF101BL...

Low profile Inbox for new vinyl siding construction. Vertical with weatherproof while in use Extra Duty clear cover.DBVS1C - spec sheet

Steel fan and fixture box kit for suspended ceilings. 70lb fand and fixture rated. Comes preset for 24" grid. 2" box depth. 20.0 cu.FBRS420SC - spec sheet

6" round brass cover kit with (2) flip lids, includes leveling ring.FLB6230MBLR - spec sheet

Low profile Inbox for flat surface retro fit construction. With weather proof while in use Extra Duty white paintable cover. Vertical.DBVR1W - spec sheet

Steel fan and fixture box with adjustable mounting bracket for exisiting construction. Adjusts from 16" to 24" on center spacing. 2" deep box. 20.0 cu.FBRS4200R - spec sheet

A combination floor box kit with installed low voltage devider. Includes four flip lids and gasket, One duplex receptacle and one low voltage duplex plate. Brass.FLB5552MB - spec sheet

Straight, zinc die-cast connector for use with metallic or non metallic liquid tight conduit type B only. 1" Trade Size. 90 degrees.

Low profile InBox for flat surface retro fit construction. With weather proof while in use Extra Duty clear cover. Single gang mounted vertically.DBVR1C - spec sheet

Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 2" Rigid, 2" EMT, 2" Liquid Tight, 2" Flex and 2" Copper Pipe.NM2050 - spec sheet

Floor box kit with steel box and metallic cover with flip lids. Single Gang. Brass.FLB5331MB - spec sheet

Plastic, 1" knockout size Push-in connector snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw driver.NM96 - spec sheet

Weatherproof device outlet box for installing on all types of siding. Installs before or after siding is up vertically or horizontally. Paintable. 19.4 cu. in.

Zinc die-cast, 2" three letter coded Gland-type service entrance cable connector that is listed to handle different cable sizes.WTC210 - spec sheet

Press on Fan and Fixture Mounting Box. 70lb Fan, 200lb Fixture. 2 Hour Fire Rating. For 1/2" and 5/8" drywall. 10.3 cu.FB415 - spec sheet

Gard-N-Post. 19.5" support for outdoor light fixtures or GFCI devices outdoors. Opennings on both sides of post for back to back power or power on one side and low voltage on the other. Built in...

Steel fan and fixture box with adjustable mounting bracket for new construction. 16" to 24" on center positioning. Bracket pre-set and 1/2" ceiling thickness. Bend Bracket along the score lines for...

Straight, zinc die-cast connector for use with metallic or non metallic liquid tight conduit type B only. 3/4" Trade Size.

Zinc die-cast, Single screw, 1-1/4" knockout squeeze connector with round end stop. For Flex, AC, MCI cable. Concrete tight when taped. End stop diameter: 1.240