Arlington Industries

Non Metallic 90 degree connector for use with non metallic liquid tight conduit type B only. 1" Trade Size.

Low voltage bracket for new construction. Mounts vertical on wood or metal studs. Non Metallic. Two Gang. For class 2 low voltage wiring. Built in 3/4" Knockout.LVMB2 - spec sheet

Steel adjustable bracket with plastic box for fan and fixture mounting. 2 hour fire rated. 23.0 cu. 70lb fan rated at 24" on center, 90lb fixture rated at 16" on center, 70lb fan rated 16" on center,...

Zinc die-cast, 3/4 Knockout, Screw in connector for aluminum and steel cable. Secures to knockout with zinc die-cast locknut. Up to 1/2" flex

Nail in cable support keeps cables away from the nailing surface while supporting up to four 14/2 to 10/2 and two 14/3 to 10/3 NM cables, asold in package quantity of 25.CS20BAG - spec sheet

Zinc die-cast, Single screw, 3/4" knockout squeeze connector with round end stop. For Flex, AC, MCI cable. Concrete tight when taped. End stop diameter: .820

Non-Metallic One Box for ceiling fixtures. Mounts securely to joist on new construction. 2 Hour Fire Rating. 20.5 cu. Adjusts up to 1/2" to 1-1/2"FA426 - spec sheet

Zinc die-cast, 1-1/2" knockout cable connector with round end stop. End stop diameter: 1.390. Secures to knockout with a locknut.

Beam Clamp. Plated Steel. 3/8 threaded rod size. Static Load rating 200lbs.

Low profile Inbox for retrofit siding construction. Vertical with clear cover. Siding Lap size 1/2"DBVR141C - spec sheet

Versatile non conductive outlet box for new construction, three gang screw on. 59 cu inches.FN103F - spec sheet

Reducing Washer, Plated Steel. Reduces 2" knockout to 1" knockout.

Insulating bushing, press fit, holds firmly in place while pulling cables. Can also be used for Rigid, IMC, and PVC rigid conduit. Trade Size 3-1/2"EMT350 - spec sheet

90 degree Non Metallic snap2it connector for use with non metallic liquid tight conduit type B only. Push on installation. 1" Trade Size.NMLT9010 - spec sheet

Strut Clip for conduit on Arlingtons non metallic quicklatch pipe hangers. For 1-1/4" EMT, 1-1/4" Copper Pipe.NM2030 - spec sheet

CAM-LIGHT box for suspended ceilings. Steel, 17.0 cu. Rated up to 50lb on suspended ceiling or drywall in combination with dropwire. Installs with 4-1/2" hole saw. Rated 10lbs on drywall ceilings...

Plastic, 1/2" knockout size Push-in connector with divider to seperate cables snaps into knockout using light finger pressure, holds wires securely and is simple to remove with the twist of a screw...

Zinc die-cast, 3/4" UF connector with low profile design for smaller and standard sized underground feeder cable.

Zinc die-cast, 1/2 Knockout, Screw in connector for aluminum and steel cable. Screw in, snap tite with spring steel clip for flexible metal conduit. Up to 1/2" cable.

Nail in cable spacer that holds power or low voltage cables secure, sold in package quantity of 25.CS14 - spec sheet