You may also like
ASSA 807718 Lock Spray Lubricant
ASSA Lock spray is a lubricant and cleaner/de-icer with a new and improved formula. Using this lock spray significantly increases the reliability and longevity of mechanical and electro mechanical cylinders.
Features:
- Effective: small dosage gives quick results
- Rapid Drying: does not bind dust and grit
- Water Resistant: does not bind salt and protects against corrosion
- Service and Maintenance: recommended twice a year or according to the buildings service schedule
- Anti Freeze: De-Icing and anti freeze properties
Cleaning Instructions:
- Shake before usage. Insert the spray nozzle into the key way of the cylinder and press the button for one second. Remove the nozzle from the key way, insert the key and turn a couple of times. Wipe the key clean of any excess lubricant.
De-Icing Instructions:
- Shake before usage. Insert the spray nozzle into the key way of the cylinder and press the button for one to two seconds. Wait 30 seconds then insert the key and turn a couple of times. Wipe the key clean of any excess lubricant. Repeat if necessary. To prevent further freezing repeat the lubrication process within a few days.
Warning:
- Never use grease, oil or graphite-based lubricants in locking cylinders, as these lubricants cause disruptions in functionality and clog up the mechanism.
Manufacturer Resources
Product Specs
- Container:
- Bottle
- Product Type:
- Liquid Lubricant
- Department:
- Door Hardware
- Product Group:
- Lubricants
- Product Subgroup:
- Locksmith Equipment
- Product Size:
- 50ml
- Application:
- Lubricants
Assa Abloy Inc. ASA807718 – Frequently Asked Questions
1) What lubricant is safe to use inside a high security lock cylinder?
ASSA 807718 Lock Spray is made for exactly that: a lubricant and cleaner/de-icer for mechanical and electro-mechanical cylinders. Keep grease, oil and graphite-based products out of a cylinder, they clog the mechanism and cause functional problems. The spray dries rapidly so it doesn't bind dust and grit inside the plug.
2) Will ASSA lock spray free a frozen padlock or exterior door cylinder in winter?
It has de-icing and anti-freeze properties. Shake the can, put the nozzle in the keyway and press one to two seconds, wait 30 seconds, then insert the key and turn it a couple of times. Wipe the excess off the key. Repeat if it's still stiff, and re-lubricate within a few days to stop it freezing up again. It's also water resistant and won't bind road salt, which is what kills exterior cylinders on a salted walkway.
3) Can I use ASSA 807718 lock spray on electronic or electro-mechanical cylinders?
Yes, the spray covers both mechanical and electro-mechanical cylinders, and it's stated to increase their reliability and service life. Corrosion protection matters more on the electro-mechanical side, and the formula is water resistant and protects against corrosion.
4) How much ASSA 807718 lock spray do I get in a can, and how many cylinders will it do?
The 807718 comes as a single 50ml bottle. A routine cleaning dose is a one second press of the button per cylinder, so a small container goes a long way on a service route. Dosage is deliberately small: a short shot gives quick results rather than flooding the plug.
5) How often should lock cylinders be lubricated in a commercial building?
Twice a year is the recommendation for ASSA lock spray, or on whatever interval the building's service schedule already runs. For a property manager or MRO planner that makes it a line item on the same semi-annual walk as the door closers, and exterior openings on a salted site are the ones to prioritize.
6) What is the right way to apply ASSA lock spray so it doesn't get all over the key and the door?
Shake first. Insert the nozzle into the keyway, press one second, pull the nozzle out, then insert the key and turn it a couple of times to carry the lubricant through the pin stacks. Wipe any excess off the key. That last step is what stops the residue transferring to hands and door faces on a job with a lot of openings.
7) My key is sticking and gritty in the lock. Is a spray lubricant the fix or does the cylinder need replacing?
Sticking from dirt and dried old lubricant is what ASSA lock spray is for: it cleans as well as lubricates, and a one second shot followed by working the key a few turns usually restores the action. Where it will not help is a cylinder someone has already packed with grease, oil or graphite, since those foul the mechanism, and if the plug has been clogged that way the fix is a cylinder swap, not more product.
8) What is the manufacturer part number for ASSA lock spray?
ASSA Abloy lists this lock spray lubricant under part number 51100, sold as the ASSA 807718 model designation. There's one configuration, a 50ml bottle, so there's nothing else to specify when ordering.
How fast can I get the Assa Abloy Inc. ASA807718 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Assa Abloy Inc. ASA807718 come with a warranty?
Absolutely. The Assa Abloy Inc. ASA807718 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Assa Abloy Inc. ASA807718?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Assa Abloy Inc. ASA807718 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.