You may also like
LPS 00122 Spray Lubricant, 20oz
The LPS 00122 (LPS 1) Greaseless Lubricant in the 20oz trigger spray bottle is a light-duty industrial lubricant designed for precision parts that must remain free of oily residue. Unlike traditional sprays, this formula provides a dry, thin film that penetrates quickly and displaces moisture while specifically resisting the buildup of dust, dirt, and oil.
Features:
- Provides a dry, thin, lubricating film
- Resists oil, dust and dirt build-up
- Fast acting penetration
- Displaces moisture
- Loosens rusted or frozen parts
- Provides a short term, light, corrosion resistant barrier
- Nonconductive
- Ideal for delicate mechanisms
- Used worldwide in aviation
- Acceptable for use in Canadian food processing establishments.
- Safe on paint and most plastics
- Inverta spray valve
Specifications:
- 20 fl.oz (591 ml) trigger spray
- Appearance/Physical State: Clear straw-colored liquid
- Dielectric Strength (ASTM D-877): 32 kv
- Flash Point (TCC): 175°F (79°C)
- HMIS: 1, 2, 0
- Pour Point: - 50°F (- 46°C)
- Propellant: Carbon Dioxide
- Specific Gravity (water=1): 0.80 – 0.82
- Typical Dried Film Thickness: 5 microns
Applications:
- Cables
- Circuit breakers
- Electric motors
- Electronic connectors
- Generators
- Hinges
- Ignition systems
- Locks
- Micrometers
- Molds
- Nuts and bolts
- Precision open gears
- Power tools
- Relays
- Sliding mechanisms
- Switch gears
Manufacturer Resources
Product Specs
- Container:
- Aerosol Spray
- Product Type:
- Liquid Lubricant
- Department:
- Door Hardware
- Product Group:
- Lubricants
- Product Subgroup:
- Liquid Lubricant
- Product Size:
- 20 oz
- Application:
- Mist Spray
- Physical Form:
- Clear, Colorless Liquid
LPS LPS00122 – Frequently Asked Questions
1) Can I use LPS 1 spray lubricant on electrical gear like circuit breakers and motors?
Yes. LPS 1 Greaseless Lubricant is nonconductive and tests at 32 kv dielectric strength by ASTM D-877, which is why it gets used on circuit breakers, electric motors, generators, relays, switch gears, ignition systems and electronic connectors. The dry film it leaves is about 5 microns thick, so it does not build up on contacts.
2) Will this leave an oily film that attracts dust on door locks and hinges?
No. LPS 00122 dries to a thin film rather than staying wet, and it is formulated to resist oil, dust and dirt build-up. That is the reason it gets specified for locks, hinges and sliding mechanisms instead of a general purpose oil, which collects grit in a doorway over time.
3) Will this free up a rusted or seized latch or padlock?
That is one of its listed uses. LPS 1 penetrates fast, displaces moisture and loosens rusted or frozen parts, so it works on a seized cylinder, stuck latch, or corroded nuts and bolts. Keep in mind the corrosion barrier it leaves behind is short term and light, so for outdoor hardware you will want to reapply on a schedule rather than treat it as long term rust protection.
4) Is the LPS 00122 an aerosol can or a pump bottle?
The 20 oz size is a trigger spray bottle, 20 fl oz (591 ml), applied as a mist spray. It uses the Inverta spray valve so it can be sprayed at any angle, including upside down.
5) Will LPS 1 damage painted doors or plastic trim if it overspays?
It is safe on paint and most plastics, so light overspray on a painted door or frame is not a problem. It is a clear, straw-colored liquid that dries thin, but wipe overspray off finished surfaces anyway so you are not leaving a film where hands touch.
6) Can LPS 00122 be used in a food processing plant?
It is acceptable for use in Canadian food processing establishments. No other food facility authorization is claimed for it, so for a US plant treat it as a general industrial lubricant and check it against your own facility's program before putting it on equipment in a production area.
7) How cold can it get before this lubricant stops flowing?
Pour point is -50 F (-46 C), so it stays fluid through winter service on exterior doors, gates and equipment in cold climates. Flash point is 175 F (79 C) by TCC, which puts it in the combustible rather than flammable range, but keep it away from open flame and hot work.
8) What is the difference between LPS 1 and a heavier penetrating oil for shop use?
LPS 1 is the light-duty end of the range: it dries to a 5 micron film and is built for precision parts that must stay free of oily residue, like micrometers, relays, precision open gears and small sliding mechanisms. If you need a lubricant that stays wet and carries load on heavier machinery, or long term outdoor rust protection, this is the wrong grade, since its corrosion barrier is described as short term and light.
9) What part number do I order for the 20 oz LPS 1?
Order LPS 00122, manufacturer part number 51100. That is the 20 oz trigger spray of LPS 1 Greaseless Lubricant.
How fast can I get the LPS LPS00122 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the LPS LPS00122 come with a warranty?
Absolutely. The LPS LPS00122 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the LPS LPS00122?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the LPS LPS00122 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.