B-Line 41512F 10 GL Eaton seri...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$793.85
B-Line 41512F 10 GL Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 12 gauge

B-Line 41512F 10 GL Eaton series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 12 gauge

(No reviews yet) Write a Review

Model: 41512F 10 GL
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$793.85
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Grip Strut four diamond plank, 120" Grating length, 9.5" Grating width, Steel, 1.5" Channel size, Mill-galvanized, Grip Strut, 12 gauge

Manufacturer Resources

Product Specs

Application:
Safe, sturdy footing where non-slip is required
Channel Size:
1.5"
Compliances:
OSHA Compliant
Material Gauge:
12 gauge
Product Height:
1.5 in
Product Length Depth:
120 in
Product Weight:
5 lb
Product Width:
9.5 in
Department:
Electrical
Product Finish:
Mill-galvanized
Product Material:
Steel

B-LINE 41512F 10 GL – Frequently Asked Questions

1) What size opening does the B-Line 41512F 10 GL Grip Strut plank cover?
The 41512F 10 GL plank runs 120 inches long by 9.5 inches wide, with a 1.5 inch channel depth. On a walkway or platform you lay planks side by side to build out the width you need, so figure your span in 9.5 inch increments and cut or order to suit the 10 foot length.
2) Is Grip Strut four diamond plank OSHA compliant for walking surfaces?
Yes. The 41512F 10 GL four diamond plank is listed as OSHA compliant and is intended for safe, sturdy footing where a non-slip surface is required, which is what a facilities or MRO buyer needs for catwalks, mezzanine walkways, and equipment platforms.
3) Will mill-galvanized Grip Strut hold up outdoors or in a wash-down area?
The 41512F 10 GL is 12 gauge steel with a mill-galvanized finish. Mill galvanizing is applied to the coil before forming, so the cut edges and pierced diamonds are left bare steel. That is fine for covered or dry industrial areas, but for constant weather exposure, coastal air, or wash-down duty you want a hot-dip galvanized after fabrication or stainless plank instead.
4) What is the difference between four diamond Grip Strut plank and a two or three diamond plank?
The diamond count describes how many rows of pierced, raised diamond openings run across the width of the plank. The 41512F 10 GL is a four diamond at 9.5 inches wide, so it covers more area per piece than a two or three diamond of the same length and needs fewer runs to make up a walkway. All of them give the same non-slip pierced surface; pick the width that divides cleanly into your platform.
5) Does Grip Strut plank come with mounting hardware or support brackets?
No hardware is included with the 41512F 10 GL. The plank is the walking surface only, with a 1.5 inch channel depth that sits on your supports. You will need to order the support structure and your own fasteners or clips separately, and set support spacing to suit the load you are carrying.
6) Is 12 gauge Grip Strut heavy enough for regular foot traffic on a maintenance platform?
12 gauge steel is the common working thickness for Grip Strut walkway plank and the 41512F 10 GL is formed with a 1.5 inch deep channel, which is what carries the load between supports rather than the sheet thickness alone. Span capacity comes down to how far apart your supports sit, so lay out the framing to the span you need for your traffic and equipment loads.
How fast can I get the B-LINE 41512F 10 GL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 41512F 10 GL come with a warranty?
Absolutely. The B-LINE 41512F 10 GL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 41512F 10 GL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 41512F 10 GL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!