B-Line BCTS2-114 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 38 conduit h

Two inch conduit is the maximum size the BCTS2-114 SS6 accepts. It is built to carry multiple runs of conduit or pipe at the same elevation, with 38 conduit hole positions along its length. If you are running anything larger than 2 inch, this is the wrong member for that run.

Yes, the BCTS2 series carries a UL Listing, which is what most inspectors and institutional specs want to see on conduit support hardware. That matters on government, healthcare and education jobs where the submittal has to show a listed support system rather than field-fabricated steel.

That is exactly what it is for. Rather than hanging each conduit on its own strap, one BCTS2 member carries a whole bank of runs at a common elevation, with 38 hole positions to space them. You still need the trapeze rods or brackets and the clamps at each conduit, and your spacing has to keep the total within 400 lbs at 24 inch spans or 300 lbs at 36 inch spans.

It measures 116 inches long, 3.625 inches wide and 1.313 inches high, and weighs 7.75 lbs. At just under ten feet it ships as a long piece, so check your truck and your storage before ordering several.

Order it as Eaton B-Line BCTS2-114 SS6. The BCTS2 is the series, and SS6 designates type 316 stainless. That one part number is the complete ordering call out, with no separate finish or length suffix to add.