B-Line BCTS2-30 SS6 Eaton seri...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$370.34
B-Line BCTS2-30 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 10 conduit ho

B-Line BCTS2-30 SS6 Eaton series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 10 conduit ho

(No reviews yet) Write a Review

Model: BCTS2-30 SS6
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$370.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, Support runs of conduit/pipe on same elevation, 24" 400 lbs, 36" 300 lbs load cap, Steel, Safety factor of 3,BCTS2 series,Stainless steel type 316, 2" max conduit size, 10 conduit holes

Manufacturer Resources

Product Specs

Application:
Support runs of conduit/pipe on same elevation
Certifications:
UL Listed
Conduit Pipe Size Max:
2 in
Load Capacity:
24" 400 lbs, 36" 300 lbs
Number Of Conduits Pipes:
10
Product Height:
1.313 in
Product Length Depth:
32 in
Product Weight:
2.15 lb
Product Width:
3.625 in
Special Features:
Safety factor of 3
Department:
Electrical
Product Type:
BCTS2 series
Product Finish:
Stainless steel type 316
Product Details:
BCTS2 series
Product Material:
Steel
Product Length:
32 in

B-LINE BCTS2-30 SS6 – Frequently Asked Questions

1) How many runs of conduit will the B-Line BCTS2-30 SS6 trapeze clamp strap hold, and what size?
The BCTS2-30 SS6 carries up to 10 conduits or pipes, with a maximum size of 2 inches each. All runs sit at the same elevation, so it's meant for a single-tier trapeze or wall-mounted bank of parallel conduit rather than stacked levels.
2) Is the BCTS2-30 SS6 conduit support suitable for outdoor or corrosive environments like a wastewater plant or coastal site?
Yes. This version is stainless steel type 316, which is the grade specified for chloride exposure, marine air, and chemical process areas. If your job is dry interior work, a plain or plated steel version of the BCTS2 is the cheaper route; the SS6 suffix is what buys you the 316 corrosion resistance.
3) What are the dimensions and weight of the B-Line BCTS2-30 SS6?
It measures 32 x 3.625 x 1.313 inches and weighs 2.15 lbs. The 32 inch length is what lets it span a trapeze and take 10 conduit positions; check that against your strut spacing before ordering.
4) Is this conduit clamp strap UL Listed for electrical work?
Yes, the BCTS2 series strap is UL Listed, which is typically what an inspector or a spec on a government or healthcare job will ask for on conduit support hardware.
5) Do I still need strut and hardware to install the BCTS2-30 SS6?
Yes. The BCTS2 is a clamping strap that fastens conduit down to a strut channel run; you supply the strut, the trapeze rods or wall brackets, and the fasteners. For a 316 stainless installation, match the strut and hardware to the same grade so you don't set up galvanic corrosion at the joints.
6) Can I use the BCTS2-30 SS6 to stack conduit on two levels?
No. It supports runs of conduit or pipe on the same elevation only, holding up to 10 lines side by side in one plane. For multiple tiers you need a separate trapeze at each elevation, each with its own strap.
7) What is the exact part number to order for the 316 stainless BCTS2 with 10 conduit holes?
Order Eaton B-Line BCTS2-30 SS6. The SS6 designates stainless steel type 316; the base BCTS2 series covers conduit up to 2 inches.
How fast can I get the B-LINE BCTS2-30 SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCTS2-30 SS6 come with a warranty?
Absolutely. The B-LINE BCTS2-30 SS6 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCTS2-30 SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCTS2-30 SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!