You may also like
BQL Replacement Classic Circuit Breakers, Bolt-on, 100A, #8-2/0 AWG, 120/240V, Two-pole, 10 kAIC at 120/240V
Manufacturer Resources
Product Specs
- Amperage Rating:
- 100A
- Circuit Breaker Type:
- HBQL
- Compliances:
- HACR Rated
- Interrupt Rating:
- 10 kAIC at 120/240 Vac
- Number Of Poles:
- Two-pole
- Product Height:
- 2 in
- Product Length Depth:
- 5 in
- Product Weight:
- .5 lb
- Product Width:
- 3 in
- Voltage Rating:
- 120/240V
- Wire Size:
- #8-2/0 AWG Cu/Al
- Department:
- Electrical
- Product Group:
- Electrical Components
- Product Subgroup:
- Circuit Breakers
- Product Type:
- Classic replacement circuit breaker
- Product Details:
- Classic replacement circuit breaker
B-LINE HBQL2100 – Frequently Asked Questions
1) Is the B-Line HBQL2100 a bolt-on breaker or a plug-in?
HBQL2100 is a bolt-on breaker. It bolts to the panel bus rather than clipping on, so it only goes into a panelboard with bolt-on bus provisions. If your interior takes plug-in breakers, this two-pole 100A unit will not seat.
2) What wire sizes will the HBQL2100 lugs accept?
The lugs take #8 through 2/0 AWG, rated for both copper and aluminum conductors. That covers typical 100A feeder runs in either metal.
3) Can I use this 100A two-pole breaker on a 240V single-phase feeder?
Yes. The HBQL2100 is rated 120/240V and is a two-pole device, so it lands across both hot legs of a single-phase 120/240V system, either as a 240V two-wire load or a 120/240V feeder.
4) What is the interrupting rating on the B-Line HBQL2100?
10 kAIC at 120/240 Vac. If the available fault current at that panel exceeds 10 kA, this breaker is not the right device for the location.
5) Is the B-Line HBQL breaker a direct replacement for an existing BQL breaker in my panel?
It is built as a classic replacement breaker of the HBQL type, intended to drop into BQL-style bolt-on panelboards. Match the type stamped in your panel's breaker label to HBQL, confirm the pole count and 100A rating, and confirm the panel's interrupting requirement is 10 kA or less.
6) Can I use the HBQL2100 to feed an air conditioner or heat pump?
It's HACR rated, so it's suitable for heating, air conditioning and refrigeration branch circuits within its 100A, 120/240V rating.
7) What part number do I order for a 100A two-pole B-Line bolt-on breaker?
Order HBQL2100. One model covers this configuration: two-pole, 100A, 120/240V, bolt-on, 10 kAIC.
8) How much space does the HBQL2100 take up in the panel?
The breaker measures 5 in deep, 3 in wide and 2 in high and weighs about half a pound. For an MRO buyer stocking spares, that is a compact two-pole unit that fits a standard shelf bin.
How fast can I get the B-LINE HBQL2100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE HBQL2100 come with a warranty?
Absolutely. The B-LINE HBQL2100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE HBQL2100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE HBQL2100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.