B-Line E10 Series Light Industrial Toggle Switch

The E10 Series E10T115DS is a single-pole, double-throw toggle with three positions: ON, OFF, ON. That gives you a center-off with a live circuit in each direction, which is what you want for selecting between two loads or reversing a control circuit. The position data does not distinguish momentary action, so treat it as a standard three-position SPDT center-off toggle.

Yes, within its stated rating. The E10 Series toggle is rated 15A at 125 Vac, 10A at 250 Vac, and 3/4 hp at 50 Vac. Motor loads draw heavy inrush, so size to that horsepower figure rather than the amperage alone. Anything above 3/4 hp needs a motor-rated switch or a contactor.

No. The E10 Series toggle is rated to 250 Vac maximum (10A at that voltage), and 15A at 125 Vac. A 277V lighting branch circuit needs a switch rated for 277V. Use the E10 on 120V or 240V control and lighting work only.

No. It is single-pole, so it breaks one conductor only. Switching both ungrounded legs of a 240V circuit requires a double-pole switch. The E10T115DS handles one pole with two throw positions (ON, OFF, ON), which is a selector, not a two-leg disconnect.

Screw terminals. That means field wiring lands directly under the screws with no soldering iron or crimp tooling on site, which is the faster option for panel builders and maintenance staff swapping a failed switch in place.

It is a light industrial toggle. That puts it in machine control panels, equipment enclosures, and shop fixtures rather than washdown, high-vibration, or heavy process duty. For those environments you want a sealed or heavy duty rated switch instead. The E10 is single-pole double-throw with screw terminals and a 15A at 125 Vac rating.

The lever is 0.563 inch long. Short enough that it sits close to the panel face, so check it clears any guard or door you plan to close over it, and expect a fairly firm throw rather than a long-handled one.