You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Bushing Length:
- 0.47 inch bushing
- Lever Length:
- 0.563 inch lever
- Number Of Poles:
- Two-pole
- Number Of Positions:
- ON, OFF, ON
- Series:
- E10
- Terminals:
- Screw
- Throw Type:
- Double-throw
- Department:
- Electrical
- Product Group:
- Sensors & Switches
- Product Subgroup:
- Switches
- Product Type:
- Toggle Switch
- Product Length:
- 1.3 IN
- Product Details:
- Toggle Switch
- Performance Rating:
- 6A at 125 Vac, 3A at 250 Vac
- Product Height:
- 2.1 IN
- Product Weight:
- .1 LB
- Product Width:
- .7 IN
B-LINE E10T206DS – Frequently Asked Questions
1) Can the B-Line E10T206DS toggle switch run a 120V motor or load over 6 amps?
No. The E10T206DS is rated 6A at 125 Vac and 3A at 250 Vac, so anything drawing more than 6 amps on a 120V circuit is outside its rating. It is a light industrial control switch, not a power switch for heavy loads. Size the load to those two ratings before wiring it in.
2) Is the E10T206DS a center-off switch, or does it stay on in both positions?
It is an ON, OFF, ON switch, so the center position breaks the circuit and both outer positions make. That is the arrangement you want for selecting between two loads or two directions with a neutral stop in the middle. If you need a straight two-position ON/OFF, this is the wrong position code.
3) Is the B-Line E10T206DS a DPDT switch?
Yes. Two poles, double throw, with an ON, OFF, ON position arrangement, which makes it a DPDT center-off switch. Two independent circuits switch together between two sets of contacts.
4) What panel thickness will the 0.47 inch bushing on this E10 toggle switch clear?
The threaded bushing on the E10T206DS is 0.47 inch long, which is the depth available for panel material plus the mounting nut and any washer or locking ring. Thin sheet metal or plastic control panels are no issue; a thick enclosure wall can eat the available thread, so measure your panel before you order.
5) Does the E10T206DS use screw terminals or solder tabs?
Screw terminals. You can land stranded wire with ring or fork terminals, or solid conductors directly, without soldering, which makes it practical for field service and panel rework. There are two poles to wire, so plan for six terminal connections on a double-throw arrangement.
6) Is the toggle lever long enough to operate with gloves on?
The lever on the E10T206DS is 0.563 inch, a short bat-style handle typical of light industrial panel switches. It is fine for bare-handed or light-glove operation on a control panel, but with heavy work gloves a longer lever or a paddle actuator is easier to find by feel.
7) What part number do I order for this B-Line E10 Series toggle switch?
Order it as B-Line E10T206DS, from the E10 Series of light industrial toggle switches. That single part number covers the two-pole, double-throw, ON-OFF-ON configuration with screw terminals, so there are no finish or size options to specify.
How fast can I get the B-LINE E10T206DS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE E10T206DS come with a warranty?
Absolutely. The B-LINE E10T206DS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE E10T206DS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE E10T206DS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.