You may also like
Eaton auxiliary support accessories, Steel, Telco gray powder coat, Angle size 1-1/2" X 1-1/2" X 3/16", 110" length, Support angle
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.5 in
- Product Length Depth:
- 10 in
- Product Weight:
- 24 lb
- Product Width:
- 1.5 in
- Department:
- Electrical
- Product Model:
- Support angle
- Product Finish:
- Telco gray powder coat
- Product Material:
- Steel
B-LINE SB212C10TG – Frequently Asked Questions
1) What size angle is the B-Line SB212C10TG support angle?
The B-Line SB212C10TG is a 1-1/2 inch by 1-1/2 inch equal-leg steel angle with a 3/16 inch leg thickness, supplied in a 110 inch length. That 3/16 inch wall is a structural angle rather than light formed sheet, so it takes load across a run without the leg deflecting the way a thin-gauge bracket does.
2) What finish is on the B-Line auxiliary support angle, and is it suitable for a telecom room?
It's finished in Telco gray powder coat over steel, the standard color used on cable runway, ladder rack and auxiliary framing in central offices and data rooms. If your existing runway and support framing is Telco gray, this angle matches it visually on the same run.
3) How much does a 110 inch B-Line support angle weigh for handling and overhead install?
Each piece comes in at 24 lb. At 110 inches long that's a two-person lift to get it up to a threaded rod or wall bracket at ceiling height, and it's worth factoring into the dead load you're hanging off the structure when several are ganged on one run.
4) Does the B-Line support angle come with mounting hardware?
What ships is the angle itself, model designation Support angle, MPN SB212C10TG. Anchors, threaded rod, beam clamps, bolts and any splice or corner fittings are ordered separately and sized to the structure you're fastening to.
5) Does the B-Line SB212C10TG support angle carry a UL listing or other certification?
No certification applies to this part. It's a plain steel structural support angle for auxiliary framing, not an electrical device, so it carries no listing of its own. Where a listed assembly is required, the certification sits with the runway, enclosure or raceway it's supporting.
6) Can I cut the 110 inch B-Line angle down to length on site?
It's hot-worked steel stock at 1-1/2 x 1-1/2 x 3/16, so it cuts and drills with normal site tooling. Bear in mind the Telco gray powder coat stops at the factory ends, so any field cut leaves bare steel that should be touched up if the run is in a damp or corrosive space.
How fast can I get the B-LINE SB212C10TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB212C10TG come with a warranty?
Absolutely. The B-LINE SB212C10TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB212C10TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB212C10TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.