You may also like
B-Line Eaton auxiliary support accessories, Steel, Telco gray powder coat, Angle size 1-1/2" X 1-1/2" X 3/16", 110" length, Support angle
Model: BLN-SB212C10TG
Eaton auxiliary support accessories, Steel, Telco gray powder coat, Angle size 1-1/2" X 1-1/2" X 3/16", 110" length, Support angle
B-LINE
$313.86
$312.24
Eaton auxiliary support accessories, Steel, Yellow zinc, Angle size 1-1/2" X 1-1/2" X 3/16", Support angle
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.5 in
- Product Length Depth:
- 10 in
- Product Weight:
- 24 lb
- Product Width:
- 1.5 in
- Department:
- Electrical
- Product Model:
- Support angle
- Product Finish:
- Yellow zinc chromate
- Product Material:
- Steel
B-LINE SB212C10YZ – Frequently Asked Questions
1) Is a yellow zinc chromate finish OK for outdoor or damp electrical installs?
Yellow zinc chromate is a plated finish on carbon steel, so it is meant for dry interior use. It handles normal indoor humidity and construction handling, but it is not a hot-dip galvanized or stainless finish. For exterior, wash-down, or corrosive areas, specify a galvanized or stainless auxiliary support instead of the yellow zinc SB212C10YZ.
2) What is the B-Line support angle actually used for on an electrical job?
It is an auxiliary support member, used to bridge or extend off structure so you have something solid to land conduit clamps, strut, boxes, or cable tray brackets on. Typical use is spanning between joists, bar joists, or studs where the fixture or raceway does not line up with existing structure. At 10 inches long it is a short bridging or kicker piece, not a full-length strut run.
3) Do the B-Line SB212C10YZ angles come with mounting bolts or anchors?
No fasteners are part of it. The SB212C10YZ is the steel angle only, so the anchors, bolts, or screws that suit your substrate (concrete, deck, joist, or strut) have to be ordered separately along with any clamps or channel nuts you intend to land on it.
4) What part number do I order for the 10 inch yellow zinc B-Line support angle?
Order Eaton B-Line MPN SB212C10YZ. The suffix breaks down as the 1-1/2 x 1-1/2 angle profile at a 10 inch cut length in yellow zinc, so length and finish are both fixed in that number rather than selected separately.
5) Is the B-Line SB212C10YZ support angle UL listed?
No listing or certification applies to this part. It is a plain steel structural support member rather than an electrical device, so it carries no agency listing of its own. If your spec calls for listed supports, that requirement sits with the clamps, straps, or raceway components mounted to it.
6) How much does the B-Line SB212C10YZ weigh, and can one person handle it?
The listed product weight is 24 lb. That is a one-person carry but heavy enough that you will want it staged near the work rather than hauled up a ladder repeatedly.
How fast can I get the B-LINE SB212C10YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB212C10YZ come with a warranty?
Absolutely. The B-LINE SB212C10YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB212C10YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB212C10YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.