You may also like
Eaton auxiliary support accessories, Steel, Yellow zinc, 10" length, Support angle
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.5 in
- Product Length Depth:
- 10 in
- Product Weight:
- 18 lb
- Product Width:
- 1.5 in
- Department:
- Electrical
- Product Model:
- Support angle
- Product Finish:
- Yellow zinc chromate
- Product Material:
- Steel
B-LINE SB212A10YZ – Frequently Asked Questions
1) What size angle is the B-Line SB212A10YZ support angle?
The SB212A10YZ is a 1-1/2 by 1-1/2 inch steel angle, 10 inches long. That leg size is what determines whether it will sit flat against your strut, channel, or wall surface and still leave room for the hardware you are bolting through it.
2) Is the yellow zinc finish on the B-Line SB212A10YZ suitable for outdoor or damp locations?
The finish is yellow zinc chromate over steel, which is a plated corrosion-resistant coating intended for indoor and protected dry industrial environments. For exposed exterior runs, wash-down areas, or coastal sites, specify hot dip galvanized or stainless support hardware instead.
3) What is a support angle like the B-Line SB212A10YZ actually used for on an electrical job?
It is an auxiliary support bracket: a short length of angle iron used to pick up a load off a wall, column, or strut run and give you a second plane to bolt to. Electricians use pieces like this to hang boxes, brace strut trapeze runs, kick out a conduit rack from a wall, or catch a support where the primary channel does not land where you need it. The 10 inch length is short enough to be a bracket rather than a full run.
4) Does the B-Line SB212A10YZ support angle come with bolts, nuts, or channel hardware?
No. The SB212A10YZ is the steel angle only. You will need to add your own channel nuts, hex bolts, washers, and any anchors for the substrate, sized to the strut system you are tying into. Order that hardware in the same finish family so you are not mixing plated and galvanized parts in one connection.
5) Is the B-Line SB212A10YZ sold as a single piece or in a carton?
It is a single catalog item, model SB212A10YZ, with one ordering configuration. The published weight of 18 lb is the shipping weight for the unit as supplied, so factor that into how you stage and carry them to the ceiling or rack line.
How fast can I get the B-LINE SB212A10YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB212A10YZ come with a warranty?
Absolutely. The B-LINE SB212A10YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB212A10YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB212A10YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.