You may also like
Eaton auxiliary support accessories, Yellow, Polyethylene, Package of 10, Hardware size: 3/8"-16, Threaded rod end cap
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .5 in
- Product Length Depth:
- .343 in
- Product Weight:
- .04 lb
- Product Width:
- .343 in
- Department:
- Electrical
- Product Model:
- Threaded rod end cap
- Product Size:
- Hardware size 3/8 in - 16
- Product Color:
- Yellow
- Product Material:
- Polyethylene
B-LINE SB300BYELLOW – Frequently Asked Questions
1) Will the B-Line SB300BYELLOW end cap fit 3/8-16 threaded rod?
Yes. The B-Line SB300BYELLOW cap is made for 3/8 inch-16 hardware, so it pushes onto standard 3/8-16 all-thread hanger rod. It will not fit 1/2-13 or 1/4-20 rod; those take a cap sized for that diameter.
2) What is a threaded rod end cap used for on a job site?
It covers the exposed cut end of hanging rod so nobody walks into a sharp thread or scrapes an arm reaching into a ceiling space. The B-Line SB300BYELLOW is bright yellow polyethylene, so the rod end is visible as well as protected, which is what inspectors and safety officers look for on overhead electrical and mechanical hangers.
3) How many B-Line SB300BYELLOW rod end caps come in a package?
They ship 10 to a package. For a typical trapeze or strut hanger run with four rod drops per support, one package covers roughly two to three assemblies, so order by drop count rather than by support count.
4) How far does the B-Line 3/8-16 rod cap stick out past the rod end?
The cap is .5 in high and .343 in across in both width and depth, so it adds about a half inch below the cut end of the rod and barely more than the rod diameter in width. That matters when your rod stops just short of a ceiling grid or a finished soffit and you need the clearance.
5) Is the yellow polyethylene rod cap suitable for a damp or corrosive area?
Polyethylene does not rust or corrode, so the cap holds up in damp mechanical rooms, parking structures and wash-down areas better than a metal cap would. It is a protective cover only, not a load-bearing part, so it carries no structural rating.
6) Does the B-Line SB300BYELLOW rod end cap carry any listing or certification?
The SB300BYELLOW is a plain safety cover for the end of 3/8-16 rod and is catalogued with certifications marked Not Applicable. Specify it on a job for personnel protection and visibility, not to satisfy a listed-product line on a submittal.
How fast can I get the B-LINE SB300BYELLOW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB300BYELLOW come with a warranty?
Absolutely. The B-LINE SB300BYELLOW is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB300BYELLOW?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB300BYELLOW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.