You may also like
Eaton auxiliary support brace, Steel, ATR Size: 5/8"-11, Hole diameter: 11/16", Telco gray powder coat, Single diagonal brace
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .38 in
- Product Length Depth:
- 10.5 in
- Product Weight:
- 1.84 lb
- Product Width:
- 1.75 in
- Department:
- Electrical
- Product Model:
- Single diagonal brace
- Product Finish:
- Telco gray powder coat
- Product Size:
- ATR Size 5/8 in - 11, hole diameter 11/16 in
- Product Material:
- Steel
- Product Length:
- 10.5 in
B-LINE SB309BTG – Frequently Asked Questions
1) How long is the B-Line diagonal sway brace and will it fit my available ceiling space?
It measures 10.5 inches in length, 1.75 inches wide and .38 inch thick, so it needs roughly a foot of diagonal clearance between the rod and the structure above. In tight plenums measure the diagonal run before committing.
2) Does this brace come with nuts, washers or rod?
The SB309BTG is the steel brace only. You supply the 5/8-11 all-thread rod plus the nuts and washers to land it, since rod length depends on your drop height.
3) Is one single diagonal brace enough, or do I need a pair?
This is a single diagonal brace, meaning it resists movement in one plane only. Where sway has to be controlled in both directions along and across a runway, braces are installed in opposing pairs at the same rod point. Order quantity accordingly.
4) Is the Telco gray finish on this Eaton B-Line brace suitable for a telecom or data center room?
Telco gray powder coat over steel is the standard finish used to match cable runway and rack hardware in central office and data center rooms, so the brace blends with existing overhead ironwork rather than standing out as plain galvanized.
5) How much does the SB309BTG brace weigh for load calculations on my overhead support?
Each brace weighs 1.84 lb. That is the dead load you add per brace point when totaling an overhead runway or tray support, and it is light enough for one person to hold in place while starting the rod nuts.
6) Does the B-Line SB309BTG carry a UL listing or seismic certification?
The SB309BTG is supplied as a plain steel auxiliary support brace with no certification designation attached to it. If your job carries a seismic bracing submittal requirement, the bracing assembly has to be engineered and approved as a system by the designer of record.
How fast can I get the B-LINE SB309BTG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB309BTG come with a warranty?
Absolutely. The B-LINE SB309BTG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB309BTG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB309BTG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.