You may also like
B-Line Eaton series beam clamps, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 8-7/8" flange width, Electro-plated zinc
Model: BLN-B761-22A-6ZN
Eaton B-Line series beam clamps, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 8-7/8" flange width, Electro-plated zinc
B-LINE
$26,124.14
B-Line Eaton series beam clamps, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 5-7/8" flange width, Electro-plated zinc
Model: BLN-B761-22A-4ZN
Eaton B-Line series beam clamps, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 5-7/8" flange width, Electro-plated zinc
B-LINE
$24,349.84
B-Line Eaton series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 14-7/8" flange width, Electro-pla
Model: BLN-B761-22-12ZN
Eaton B-Line series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 14-7/8" flange width, Electro-plated zinc
B-LINE
$27,874.68
B-Line Eaton series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 8-7/8" flange width, Electro-plat
Model: BLN-B761-22-6ZN
Eaton B-Line series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 8-7/8" flange width, Electro-plated zinc
B-LINE
$24,276.90
B-Line Eaton series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 9"-11-7/8" flange width, Electro-
Model: BLN-B761-22-9ZN
Eaton B-Line series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 9"-11-7/8" flange width, Electro-plated zinc
B-LINE
$26,073.25
Eaton B-Line series beam clamps, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 14-7/8" flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Flange Width:
- 14.875 in
- Beam Thickness:
- 1 in
- Certifications:
- cULus Listed
- Product Height:
- 3.375 in
- Product Length Depth:
- 12 in
- Product Weight:
- 2.35 lb
- Product Width:
- 14.875 in
- Set Screw Size:
- 3/8"-16
- Thread Rod Size:
- 3/8"-16
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
B-LINE B761-22A-12ZN – Frequently Asked Questions
1) What size beam flange will the B-Line B761-22A-12ZN beam clamp fit?
The B761-22A-12ZN is sized for a beam flange up to 14-7/8 inches wide with a flange thickness of 1 inch. That is a wide-flange structural beam, not a small bar joist or light purlin. If your steel has a narrower flange, you want a smaller clamp in the B761 range rather than forcing this one, because the clamp body spans the full flange width.
2) What size threaded rod does this B-Line beam clamp take?
It is tapped for 3/8 inch-16 threaded rod, and the set screw that locks it to the beam is also 3/8 inch-16. Order the rod, nuts and washers separately; the clamp gives you the attachment point only.
3) Will an electro-plated zinc beam clamp hold up outdoors or in a wet area?
Electro-plated zinc is a dry-interior finish. It is fine for conditioned mechanical rooms, ceiling plenums and interior structural steel, but for exterior steel, parking structures, wash-down areas or corrosive process spaces you should step up to a hot-dip galvanized or stainless beam clamp instead.
4) Do I need to weld or drill the beam to install this clamp?
No. The B761 series beam clamp bolts onto the flange and is secured with a 3/8 inch-16 set screw, so the structural steel is never drilled, cut or welded. That is usually the deciding factor on a retrofit where the engineer of record will not allow penetrations in the beam.
5) What do I order along with this beam clamp to finish an overhead conduit hanger?
The clamp is the top-of-rod attachment. To complete the assembly you will still need 3/8 inch-16 all-thread cut to your drop length, hex nuts and washers at the clamp and at the bottom, and whatever terminates the rod, a conduit hanger, strut channel with a rod nut, or a trapeze pair if you are ganging runs. Keep every threaded component at 3/8 inch-16 so it matches the clamp tapping.
6) How much does the B761-22A-12ZN beam clamp weigh and how big is it?
It weighs 2.35 pounds and measures 3.375 in height, 14.875 in width and 12 in length/depth. Worth knowing before you order a case of them for an overhead run, since the dead load of the clamps themselves adds up across a long conduit rack.
7) Is the B-Line B761-22A-12ZN the same part as a plain B761 clamp?
The full catalog designation matters when you reorder. B761-22A-12ZN identifies this specific combination: the 22A clamp size for a 14-7/8 inch flange, the 12 dimension, and ZN for the electro-plated zinc finish. Ordering just B761 will not get you a matched part, so give the distributor the complete number.
How fast can I get the B-LINE B761-22A-12ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B761-22A-12ZN come with a warranty?
Absolutely. The B-LINE B761-22A-12ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B761-22A-12ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B761-22A-12ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.