Eaton B-Line series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 13/16", 1" beam thickness, 9"-11-7/8" flange width, Electro-plated zinc
Manufacturer Resources
Product Specs
- Beam Thickness:
- 1 in
- Certifications:
- cULus Listed
- Product Height:
- 3.375 in
- Product Length Depth:
- 9 in
- Product Weight:
- 2.14 lb
- Product Width:
- 11.875 in
- Set Screw Size:
- 3/8"-16
- Thread Rod Size:
- 3/8"-16
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
B-LINE B761-22-9ZN – Frequently Asked Questions
1) What beam flange width does the B-Line B761-22-9ZN beam clamp fit?
The B761-22-9ZN is built for wide flanges, covering a 9 inch to 11-7/8 inch flange width with a beam thickness up to 1 inch. If your steel is narrower than 9 inches, this is the wrong size in the B761 range and you want a shorter clamp body instead.
2) What size threaded rod hangs from this Eaton B-Line beam clamp?
It takes 3/8"-16 threaded rod, and the set screw that locks it onto the beam is also 3/8"-16. Rod, nuts and washers are ordered separately.
3) Is the B-Line B761 beam clamp UL listed for electrical support work?
Yes, it is cULus Listed, so it carries both US and Canadian listing for supporting conduit, cable tray, strut and similar loads off structural steel.
4) Can this beam clamp be used indoors and out, or is the zinc finish interior only?
The finish is electro-plated zinc, which is a standard dry interior finish for hanging conduit and trapeze runs inside a building. For wet, corrosive or exterior steel you should be specifying a hot dip galvanized or stainless clamp instead.
5) How much room does the B761-22-9ZN clamp take up on the steel?
Plan for a piece measuring 11.875 x 9 x 3.375 inches and weighing 2.14 lb. That height matters when you are tight between the beam and a ceiling grid or deck, since the clamp body stands off the flange before the rod even starts.
6) Do I need to drill or weld the beam to install this clamp?
No. It is a mechanical beam clamp that grips the flange and is locked with the 3/8"-16 set screw, so the structural steel stays untouched. That is usually the deciding factor on jobs where drilling or welding the building steel is not permitted.
7) What is the exact part number to order this wide-flange B-Line clamp?
Order Eaton B-Line part B761-22-9ZN. The 9ZN suffix is the 9 inch to 11-7/8 inch flange range in electro-plated zinc; other numbers in the B761 family cover narrower flanges.
How fast can I get the B-LINE B761-22-9ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B761-22-9ZN come with a warranty?
Absolutely. The B-LINE B761-22-9ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B761-22-9ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B761-22-9ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.