B-Line Eaton series beam clamp...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$27,795.63
B-Line Eaton series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 1" beam thickness, 9"-11-7/8" flange width, Electro-plated z

B-Line Eaton series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 1" beam thickness, 9"-11-7/8" flange width, Electro-plated z

(No reviews yet) Write a Review

Model: B761-22A-9ZN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$27,795.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series beam clamps, Beam clamp, 3/8"-16 thread/rod size, 3/8"-16 screw size, 1" beam thickness, 9"-11-7/8" flange width, Electro-plated zinc finsh

Manufacturer Resources

Product Specs

Beam Thickness:
1 in
Certifications:
cULus Listed
Product Height:
3.375 in
Product Length Depth:
9 in
Product Weight:
2.28 lb
Product Width:
11.875 in
Set Screw Size:
3/8"-16
Thread Rod Size:
3/8"-16
Department:
Electrical
Product Group:
Clamps & Supports
Product Subgroup:
Clamps
Product Type:
Beam clamp
Product Details:
Beam clamp

B-LINE B761-22A-9ZN – Frequently Asked Questions

1) What flange width does the B-Line B761-22A-9ZN beam clamp fit?
The B761-22A-9ZN is built for wide flange beams from 9 inches up to 11-7/8 inches. That range comes straight from the clamp geometry, 9 inches of length/depth and 11.875 inches across. If your beam flange is narrower than 9 inches, this is the wrong size in the B761 range and you want a smaller opening model.
2) What size threaded rod does this B-Line beam clamp take?
It takes 3/8"-16 threaded rod, and the set screw that locks it to the beam flange is also 3/8"-16. Order your rod, nuts and washers to match; the clamp does not include rod.
3) Will this beam clamp work on a 1 inch thick beam flange?
Yes. The B761-22A-9ZN is rated for a 1 inch beam flange thickness. Thicker flanges will not seat properly in the jaw, so check the flange thickness on your structural drawing along with the 9 to 11-7/8 inch width before ordering.
4) Is this B-Line beam clamp listed for electrical support work?
It is cULus Listed, which is what an inspector or a spec writer looks for when the clamp is carrying conduit, cable tray or raceway off structural steel. That listing covers both US and Canadian requirements.
5) Is the zinc finish on this beam clamp suitable for outdoor or wet locations?
The B761-22A-9ZN carries an electro-plated zinc finish, which is a dry indoor finish. It is fine for conditioned interiors, mechanical rooms and plenums, but for exterior, coastal or washdown areas you want a hot dip galvanized or stainless beam clamp instead.
6) How much clearance do I need above the beam for this clamp?
Allow for a 3.375 inch overall height on the clamp body, plus whatever rod and nut stack sits below it. In tight ceiling cavities that height is usually the number that decides whether a beam clamp works or you need a different attachment method.
7) Do I need to weld or drill the beam to install this B-Line clamp?
No. It clamps over the beam flange and locks with a 3/8"-16 set screw, so no drilling, welding or fireproofing damage to the structure. That is the main reason contractors pick a beam clamp over a drilled connection on wide flange steel.
8) What is the exact part number to order this wide flange beam clamp?
Eaton B-Line part number B761-22A-9ZN. The 9ZN suffix identifies the 9 to 11-7/8 inch flange range in electro-plated zinc, so distributors and estimators should quote the full string rather than just B761.
How fast can I get the B-LINE B761-22A-9ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B761-22A-9ZN come with a warranty?
Absolutely. The B-LINE B761-22A-9ZN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B761-22A-9ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B761-22A-9ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!