You may also like
B-Line Eaton series beam clamps, Malleable iron, size1", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
Model: BLN-B671-1HDG
Eaton B-Line series beam clamps, Malleable iron, size1", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
B-LINE
$8,056.86
B-Line Eaton series beam clamps, Malleable iron, 1", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
Model: BLN-B670-1HDG
Eaton B-Line series beam clamps, Malleable iron, 1", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
B-LINE
$8,010.57
B-Line Eaton series beam clamps, Malleable iron, 2", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
Model: BLN-B671-2HDG
Eaton B-Line series beam clamps, Malleable iron, 2", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
B-LINE
$15,606.43
B-Line Eaton series beam clamps, Malleable iron, 3", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
Model: BLN-B671-3HDG
Eaton B-Line series beam clamps, Malleable iron, 3", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
B-LINE
$19,577.96
B-Line Eaton series beam clamps, Malleable iron, 3", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized fin
Model: BLN-B670-3HDG
Eaton B-Line series beam clamps, Malleable iron, 3", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized finish
B-LINE
$16,611.36
Eaton B-Line series beam clamps, Malleable iron, 4", Supports pipe or rigid conduit, hardware included, Parallel pipe clamp, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- cULus Listed
- Product Diameter:
- 4 in
- Product Height:
- 4 in
- Product Weight:
- 2.05 lb
- Special Features:
- Supports pipe or rigid conduit, hardware included
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Parallel pipe clamp
- Product Size:
- 4 inch
- Product Details:
- Parallel pipe clamp
- Product Material:
- Malleable iron
B-LINE B670-4HDG – Frequently Asked Questions
1) Can I use this B-Line beam clamp outdoors or in a wet area?
It is hot-dipped galvanized malleable iron, which is the finish normally specified for outdoor, damp, and unheated areas where plain or electro-zinc plated hardware would rust. For corrosive process environments, stainless hardware is the usual step up.
2) Is the B-Line B670-4HDG clamp listed for electrical conduit support?
It is cULus Listed and rated to support rigid conduit as well as pipe, which is what an electrical inspector looks for when conduit is hung parallel to a structural member. That Listing covers both the US and Canadian requirements.
3) Do I have to buy the nuts and bolts separately for the B670 parallel pipe clamp?
No. Hardware comes with the clamp, so the bolt and nut needed to close it around the pipe are in the box. What you supply is whatever fastens the assembly to the beam or structure.
4) What does a parallel pipe clamp do that a standard beam clamp does not?
A parallel pipe clamp holds the pipe or conduit running alongside and parallel to the beam or support member, rather than hanging it below on a rod. Use it when the run follows a beam flange and you want the line tight to the steel. If the pipe crosses the beam or has to drop away from it, a beam clamp with threaded rod and a hanger is the right choice instead.
5) What part number do I order for the 4 inch hot-dipped galvanized version?
Order Eaton B-Line B670-4HDG. The B670 is the parallel pipe clamp series, the 4 calls out the 4 inch size, and HDG is the hot-dipped galvanized finish.
6) How much does the 4 inch B-Line B670 galvanized clamp weigh?
2.05 lb each. That matters when you are totalling dead load on a long conduit run or estimating a pallet of them for a multi-floor job.
7) Is malleable iron strong enough for a 4 inch rigid conduit run?
Malleable iron is the standard body material for this class of pipe and conduit clamp because it takes bolt torque and shock load without cracking the way gray cast iron can. The B670-4HDG is malleable iron throughout with a hot-dipped galvanized coating over it.
How fast can I get the B-LINE B670-4HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B670-4HDG come with a warranty?
Absolutely. The B-LINE B670-4HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B670-4HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B670-4HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.