You may also like
B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
Model: BLN-B3050-2X9PLN
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
B-LINE
$154.94
$140.80
B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
Model: BLN-B3050-2X5PLN
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
B-LINE
$122.96
$98.37
B-Line Eaton series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width,
Model: BLN-B3050-2X10PLN
Eaton B-Line series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain Steel
B-LINE
$159.59
$148.53
B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
Model: BLN-B3050-2X8PLN
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain steel
B-LINE
$147.46
$131.16
B-Line Eaton series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange
Model: BLN-B3050-2X4PLN
Eaton B-Line series beam clamps, Suspendes hanger rod from the center of an I-beam., 1000 lb, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
B-LINE
$118.63
$92.59
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 1000 lb load capacity, Steel, Beam clamp, 1/2"-13 thread/rod size, 1/2" flange width, Plain
Manufacturer Resources
Product Specs
- Application:
- Suspends hanger rod from I-beam
- Beam Flange Width:
- .5 in
- Certifications:
- cULus Listed
- Load Capacity:
- 1000 lb
- Product Height:
- 2.125 in
- Product Length Depth:
- 1.375 in
- Product Weight:
- 1.428 lb
- Product Width:
- .625 in
- Thread Rod Size:
- 1/2"-13
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
- Product Material:
- Steel
B-LINE B3050-2X7PLN – Frequently Asked Questions
1) What size threaded rod does the B-Line B3050-2X7PLN beam clamp take?
It is tapped for 1/2 inch-13 threaded rod. That is the thread size you order your rod, coupling nuts and jam nut in, so a 1/2-13 all-thread drop screws straight into the clamp body. It will not accept 3/8-16 rod without a reducing coupling.
2) How much weight can a B3050 beam clamp hold?
Rated at 1000 lb load capacity. That covers most single-point trapeze and pipe or conduit drops on 1/2 inch rod, but the rating is per clamp, so on a trapeze split the load across the two hangers and stay inside the rating at each point.
3) Is this beam clamp listed for electrical work and conduit support?
The Eaton B-Line B3050 beam clamp is cULus Listed, so it satisfies inspectors looking for a listed support on conduit, cable tray and raceway drops in both US and Canadian jurisdictions. It is an electrical support component, used to hang a rod from existing building steel.
4) What finish does the B3050-2X7PLN come in, and can I use it outdoors?
This one is plain steel, no coating. Plain finish is meant for dry interior locations; in a wet, humid or corrosive area, specify a galvanized or electro-plated version of the same clamp instead of the plain.
5) How much clearance does the B3050 beam clamp need around the beam?
It is a compact body: 2.125 in high, 1.375 in deep and .625 in wide. That small footprint matters when you are hanging off a beam flange with duct, tray or another trade tight against the steel. Each clamp weighs 1.428 lb, which is worth counting when you are ordering a case for a large run.
6) Do I need to weld or drill the beam to hang rod from it?
No. The B3050 clamps onto the existing flange, which is the point of it: no drilling, no welding, no hot work permit, and the structural steel is left untouched. You are supplying the 1/2-13 rod and nuts separately; the clamp itself is the attachment to the beam.
7) Is the part number B3050-2X7PLN one clamp or a box?
B3050-2X7PLN is the Eaton B-Line catalog number for the plain-finish clamp cut for 1/2 inch flange with 1/2-13 tapping. That is the number to quote to a distributor or put on a submittal for this exact configuration.
How fast can I get the B-LINE B3050-2X7PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3050-2X7PLN come with a warranty?
Absolutely. The B-LINE B3050-2X7PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3050-2X7PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3050-2X7PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.