B-Line Eaton series beam clamp...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$366.49
Image coming soon

B-Line Eaton series beam clamps, Suspends hanger rod from I-beam, 3000 lb, Beam clamp, 3/4"-10 thread/rod size, 1" flange width, Plain steel

(No reviews yet) Write a Review

Model: B3050-5X6PLN

In Stock (leaves warehouse same day if ordered before 3pm ET)

$366.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 3000 lb, Beam clamp, 3/4"-10 thread/rod size, 1" flange width, Plain steel

Manufacturer Resources

Product Specs

Application:
Suspends hanger rod from I-beam
Beam Flange Width:
1 in
Certifications:
cULus Listed
Load Capacity:
3000 lb
Product Height:
3 in
Product Length Depth:
6 in
Product Weight:
1.43 lb
Product Width:
.875 in
Thread Rod Size:
3/4"-10
Department:
Electrical
Product Group:
Clamps & Supports
Product Subgroup:
Clamps
Product Type:
Beam clamp
Product Details:
Beam clamp
Product Material:
Steel

B-LINE B3050-5X6PLN – Frequently Asked Questions

1) What size threaded rod does the B-Line B3050-5X6PLN beam clamp take?
The B3050-5X6PLN takes 3/4"-10 threaded rod. That's the only rod size this model accepts, so if your trapeze or hanger assembly runs 1/2"-13 or 3/8"-16 rod, you need a different clamp in the series rather than this one.
2) Will this beam clamp fit the flange on my I-beam?
This B-Line clamp is sized for a 1 inch beam flange width. Measure the flange thickness at the edge where the clamp will bite: if it runs thicker than 1 inch, this model will not close on it and you need a wider-opening clamp. It is made to hang a rod off the bottom flange of a structural I-beam.
3) How much weight can the B-Line B3050 beam clamp hold?
Rated at 3000 lb load capacity. That covers heavy trapeze runs, large conduit banks, and suspended equipment, but the rating applies to the clamp only. Your 3/4"-10 rod, the beam itself, and the connection at the load end all have to carry the same load, and the lowest-rated item in that chain is your real limit.
4) Is this beam clamp UL listed for electrical support?
It is cULus Listed, so it carries both the US and Canadian listings. That matters on inspected commercial and institutional jobs where conduit and cable tray supports have to be listed hardware, and it means the same part number works on either side of the border.
5) What is this beam clamp made of, and can I use it outdoors or in a damp area?
Plain steel, with no plating or coating called out. Plain steel is fine for dry interior structural steel, but in an exterior, wash-down, or humid environment it will rust at the contact points. For those conditions choose an electro-galvanized or hot dip galvanized version of the same clamp instead of the plain finish.
6) Do I need to drill or weld the beam to hang rod from it?
No. The B3050 is a mechanical beam clamp, so it grips the flange and gives you a 3/4"-10 rod connection with no drilling, welding, or hot work on the structural steel. That keeps you off a hot work permit and leaves the beam intact, which is usually what the structural engineer wants.
7) Does the beam clamp come with the threaded rod and nuts?
You get the clamp only. The 3/4"-10 all-thread rod, the nuts and washers at both ends, and whatever you are hanging at the bottom (strut, trapeze, pipe clamp, tray hanger) are all ordered separately. Plan a rod length per drop plus enough thread engagement at each end.
8) How much room do I need around the beam to install this clamp?
The clamp measures 3 in height, 6 in length/depth and .875 in width, and weighs 1.43 lb. Check the 6 inch dimension against your clearance: on tight ceiling cavities or where beams sit close to deck, that reach is what decides whether you can get the clamp on and turn the set screw.
How fast can I get the B-LINE B3050-5X6PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3050-5X6PLN come with a warranty?
Absolutely. The B-LINE B3050-5X6PLN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3050-5X6PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3050-5X6PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!