Eaton B-Line series beam clamps, Suspends hanger rod from I-beam, 3000 lb, Steel, Beam clamp, 3/4"-10 thread/rod size, 1" flange width, Plain
Manufacturer Resources
Product Specs
- Application:
- Suspends hanger rod from I-beam
- Beam Flange Width:
- 1 in
- Certifications:
- cULus Listed
- Load Capacity:
- 3000 lb
- Product Height:
- 3 in
- Product Length Depth:
- 9 in
- Product Weight:
- 5.75 lb
- Product Width:
- .875 in
- Thread Rod Size:
- 3/4"-10
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
- Product Material:
- Steel
B-LINE B3050-5X9PLN – Frequently Asked Questions
1) What size threaded rod does the B-Line B3050 beam clamp take?
The B3050-5X9PLN beam clamp is tapped for 3/4"-10 threaded rod. That is the only rod size it accepts, so if your trapeze or hanger run is built on 1/2"-13 or 3/8"-16 rod you need a different clamp in the series rather than an adapter.
2) What beam flange width does this B-Line beam clamp fit?
It is sized for a 1 inch beam flange width. Beam clamps are cut to a specific flange thickness range, so measure the flange on your I-beam before ordering; a thicker flange will not draw up in this jaw.
3) Is this beam clamp listed for electrical support work?
It is cULus Listed, which is what most electrical inspectors want to see on conduit and cable tray support hardware in commercial and institutional buildings.
4) Can I use a beam clamp instead of drilling the steel beam for hanger rod?
That is exactly what this part is for. The B3050 clamps onto the flange of an existing I-beam and suspends the hanger rod from it, so no drilling, welding, or hot work on the structural steel. Where you cannot get to a beam flange, you would go to a concrete insert or a drop-in anchor in deck instead.
5) What is the B-Line B3050 beam clamp made of, and is the plain finish OK outdoors?
The body is steel with a plain (uncoated) finish. Plain steel is intended for dry interior use; for exterior, parking structure, or wash-down areas, specify a galvanized or electro-plated version of the clamp instead.
6) How big is the B3050-5X9PLN beam clamp and what does it weigh?
Stated dimensions are 9 in length/depth, 3 in height, and .875 in width, at 5.75 lb each. Worth knowing when you are figuring clearance between the beam flange and a ceiling grid or duct, and when you are estimating the added dead load of a long run of clamps.
7) What is the part number to reorder this B-Line beam clamp for the rest of the job?
Order by Eaton B-Line part number B3050-5X9PLN. Quoting that number gets you the same 3/4"-10 rod size and 1 inch flange configuration across the whole run, which matters when a facility wants one clamp standardized on every support.
How fast can I get the B-LINE B3050-5X9PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3050-5X9PLN come with a warranty?
Absolutely. The B-LINE B3050-5X9PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3050-5X9PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3050-5X9PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.