You may also like
Eaton B-Line series beam clamps
Manufacturer Resources
Product Specs
- Beam Flange Width:
- 14.875 IN
- Beam Thickness:
- 1 IN
- Certifications:
- cULus Listed
- Product Height:
- 5 IN
- Product Length Depth:
- 12 IN
- Product Weight:
- 1.41 LB
- Product Width:
- 3 IN
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Beam clamp
- Product Details:
- Beam clamp
- Product Length:
- 12 in
B-LINE B760-22-J12ZN – Frequently Asked Questions
1) What size beam flange will the Eaton B-Line B760-22-J12ZN beam clamp fit?
The B760-22-J12ZN is built for a beam flange up to 14.875 inches wide with a flange thickness of 1 inch. Measure the flange on your steel before ordering: if your beam flange is wider than 14-7/8 inches, this clamp will not close on it and you need a larger opening or a different attachment method.
2) Is the B-Line B760 beam clamp listed for electrical support work?
It carries a cULus Listing, so it is recognized for both US and Canadian installations. That matters on jobs where the inspector wants listed support hardware for conduit, cable tray, or fixture hanging off structural steel.
3) How much room does the B760-22-J12ZN beam clamp take up on the steel?
Overall it measures 12 inches (length/depth) by 5 inches high by 3 inches wide, and weighs 1.41 lb. That 12 inch depth is the dimension to watch in a tight ceiling cavity or where you are running close to a wall or another trapeze.
4) Do I need to weld or drill the beam to hang conduit from it?
No. A beam clamp like the B-Line B760 series clamps onto the existing flange of the structural steel, so there is no drilling, welding, or damage to the member. That is usually the deciding factor where the structural engineer will not allow holes in the steel.
5) Will this clamp work on a beam with a thicker flange than 1 inch?
Not as specified. The B760-22-J12ZN is rated to a 1 inch beam thickness, so on heavier rolled sections with a thicker flange you need a clamp with a deeper jaw opening rather than forcing this one on.
6) What exact part number should I order for the B-Line wide flange beam clamp?
Order Eaton B-Line B760-22-J12ZN. That is the full manufacturer part number and the single configuration for this clamp, so there is no finish or size option to specify on top of it.
How fast can I get the B-LINE B760-22-J12ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B760-22-J12ZN come with a warranty?
Absolutely. The B-LINE B760-22-J12ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B760-22-J12ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B760-22-J12ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.