You may also like
Eaton B-Line series beam clamps
Manufacturer Resources
Product Specs
- Application:
- Designed for attachment to trus joist beams
- Certifications:
- UL Listed
- Load Capacity:
- 500 lb
- Product Height:
- 1.75 IN
- Product Length Depth:
- 2 IN
- Product Weight:
- .7 LB
- Product Width:
- 2.5 IN
- Special Features:
- Used with (B3210) series eye rods
- Thread Rod Size:
- 3/8"-16
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Trus joist beam clamp
- Product Size:
- 2"
- Product Details:
- Trus joist beam clamp
- Product Material:
- Steel
B-LINE FIG 130-2-EG – Frequently Asked Questions
1) What size threaded rod does the B-Line FIG 130-2-EG beam clamp take?
The FIG 130-2-EG is tapped for 3/8-16 threaded rod. If your hanger run is already on 3/8 inch all-thread, it drops straight in; for 1/2-13 rod you need a different figure number in the series.
2) How much weight can a FIG 130-2-EG trus joist clamp hold?
Rated at 500 lb load capacity. That is the clamp's rating; the 3/8-16 rod, the joist itself, and local code still govern what you can actually hang, so size the weakest link in the assembly.
3) Will this clamp work on a steel I-beam flange, or is it only for engineered wood joists?
It is built specifically for attachment to trus joist beams, not structural steel flanges. For hanging off a steel beam flange you want a standard steel beam clamp or C-clamp sized to the flange thickness instead.
4) Is the Eaton B-Line FIG 130-2 beam clamp UL Listed for electrical support work?
Yes, the FIG 130-2-EG carries a UL Listed certification, which is what inspectors typically look for when the clamp is supporting conduit, cable tray, or other electrical runs.
5) What accessory do I need to complete a hanger using this trus joist clamp?
It is used with B3210 series eye rods. The clamp is the attachment point only, so plan on the eye rod plus whatever 3/8-16 rod length, nuts, and hanger the run needs.
6) Can I standardize on one clamp for hanging conduit off engineered lumber across a building?
For trus joist framing, yes. The FIG 130-2-EG is a single-model item at 2 inch size with 3/8-16 rod tapping and a 500 lb rating, so one part number covers every joist location in the building as long as your rod is 3/8 inch and loads stay under the rating. Openings framed in steel or solid dimensional lumber need a different attachment.
7) What is the FIG 130-2-EG made of, and is it suitable for a damp area?
Steel construction. It is a general indoor structural support clamp; for corrosive or wet exterior environments specify a finish rated for that exposure rather than assuming this one covers it.
How fast can I get the B-LINE FIG 130-2-EG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 130-2-EG come with a warranty?
Absolutely. The B-LINE FIG 130-2-EG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 130-2-EG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 130-2-EG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.