B-Line Eaton Series C complete...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,094.16
$1,002.39
B-Line Eaton Series C complete , F-, EHD, Complete , Fixed thermal, Fixed magnetic trip type, Two-pole, 100 A, 18 kAIC at 240 Vac, 14 kAIC at 480 Vac

B-Line Eaton Series C complete , F-, EHD, Complete , Fixed thermal, Fixed magnetic trip type, Two-pole, 100 A, 18 kAIC at 240 Vac, 14 kAIC at 480 Vac

(No reviews yet) Write a Review

Model: EHD2100
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,094.16
$1,002.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton Series C complete molded case circuit breaker, F-frame, EHD, Complete breaker, Fixed thermal, Fixed magnetic trip type, Two-pole, 100 A, 18 kAIC at 240 Vac, 14 kAIC at 480 Vac, Load side, 50/60 Hz

Manufacturer Resources

Product Specs

Amperage Rating:
100A
Certifications:
UL Listed
Circuit Breaker Frame Type:
Complete breaker
Circuit Breaker Type:
EHD
Frame:
F
Frequency Rating:
50/60 Hz
Interrupt Rating:
14 kAIC at 480 Vac
Number Of Poles:
Two-pole
Product Height:
6 in
Product Length Depth:
3.38 in
Product Weight:
3 lb
Product Width:
2.75 in
Series:
Series C
Terminals:
Load side
Trip Type:
Fixed thermal, fixed magnetic
Department:
Electrical

B-LINE EHD2100 – Frequently Asked Questions

1) What is the interrupting rating on the Eaton EHD2100 breaker at 240V and 480V?
The EHD2100 is rated 18 kAIC at 240 Vac and 14 kAIC at 480 Vac. If your available fault current at the panel exceeds those numbers, this EHD-type F-frame breaker is not the right choice and you need a higher AIC frame or a series-rated combination listed for the panel.
2) Is the EHD2100 a complete breaker or just a trip unit?
It ships as a complete breaker, not a replacement trip unit or a frame needing separate parts. The EHD2100 is an Eaton Series C F-frame molded case breaker, two-pole, 100 A, with load side terminals, ready to install.
3) Can the trip settings on this Eaton 100 amp two-pole breaker be adjusted in the field?
No. The EHD2100 uses fixed thermal and fixed magnetic trip, so neither the overload nor the instantaneous pickup can be dialed in. Sizing has to be done by picking the right ampere rating, which here is 100 A. If a job calls for an adjustable magnetic setting to ride through motor inrush, specify a breaker built with adjustable trip instead.
4) Will the EHD2100 work on a 60 Hz 480 volt three-phase system?
Two-pole only, so it will not protect all three phases of a three-phase feeder by itself. It is rated for 50/60 Hz service and carries a 480 Vac rating at 14 kAIC, which suits single-phase 480 or a two-wire tap. For a full 480 Vac three-phase load, order the three-pole version of the EHD frame.
5) What part number do I order to match an existing Eaton EHD two-pole 100 amp breaker?
The catalog number is EHD2100. Reading the number tells the story: EHD is the frame type, 2 is the pole count and 100 is the ampere rating. If the breaker you are replacing is stamped EHD2100 and it is an Eaton Series C F-frame unit, this is a direct match.
6) How much space do I need in the enclosure for this F-frame breaker?
Plan around 6 in high, 2.75 in wide and 3.38 in deep for the breaker body, and it weighs about 3 lb. That depth figure is the one that usually decides whether it clears the cover on a shallow surface-mount enclosure, so check it against your can before cutting the deadfront.
7) Does this breaker have line and load lugs or only one end?
Terminals are specified on the load side. On a panelboard application the line end lands on the bus or stabs, so confirm your mounting method supplies the line connection you need before ordering.
How fast can I get the B-LINE EHD2100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE EHD2100 come with a warranty?
Absolutely. The B-LINE EHD2100 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE EHD2100?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE EHD2100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!