B-Line Eaton Series C electron...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$43,542.13
$43,492.13
B-Line Eaton Series C electronic , NG-, ND, Complete , Digitrip 310 RMS, Electronic LSI trip type, Two-pole, 1200A, 600 Vac, 85 kAIC at 240 Vac, 50 k

B-Line Eaton Series C electronic , NG-, ND, Complete , Digitrip 310 RMS, Electronic LSI trip type, Two-pole, 1200A, 600 Vac, 85 kAIC at 240 Vac, 50 k

(No reviews yet) Write a Review

Model: ND212T32W
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$43,542.13
$43,492.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton Series C electronic molded case circuit breaker, NG-frame, ND, Complete breaker, Digitrip 310 RMS, Electronic LSI trip type, Two-pole, 1200A, 600 Vac, 85 kAIC at 240 Vac, 50 kAIC at 480 Vac, Without terminals, 50/60 Hz

ND212T32W - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Amperage Rating:
1200A
Certifications:
UL Listed
Circuit Breaker Type:
ND
Frame:
NG-frame
Frequency Rating:
50-60 Hz
Interrupt Rating:
85 kAIC at 240 Vac, 50 kAIC at 480 Vac
Number Of Poles:
Two-pole
Product Height:
8.25 IN
Product Length Depth:
18.5 IN
Product Weight:
47 LB
Product Width:
8.25 IN
Series:
Series G
Terminals:
Without terminals
Trip Type:
Electronic LSI
Voltage Rating:
600 Vac
Department:
Electrical

B-LINE ND212T32W – Frequently Asked Questions

1) Does the Eaton ND212T32W circuit breaker come with lugs or terminals?
No. The ND212T32W ships without terminals, so you have to order the NG-frame terminal kit or lugs separately for your conductor size. Plan that into the job before the shutdown window, because a 1200A two-pole breaker with no lug provision cannot be landed as delivered.
2) Will the ND212T32W hold up on a 480V system with high available fault current?
Its interrupting rating is 85 kAIC at 240 Vac and 50 kAIC at 480 Vac, with a 600 Vac maximum voltage rating. If your short circuit study shows more than 50 kA available at the 480V bus, this breaker is not rated for that point without a series-rated or current-limiting arrangement. Below 50 kA at 480V it is applied straight.
3) How big and heavy is a 1200A NG-frame breaker, and can one person set it?
It measures 8.25 in high, 8.25 in wide, 18.5 in deep and weighs 47 lb. That is a two-person lift into a vertical enclosure, and you want to confirm your gutter space and enclosure depth before the swap, since 18.5 inches of depth plus separately ordered lugs and cable bend radius adds up fast.
4) Can I use this two-pole 1200A breaker on a 480V three-phase feeder?
No. A three-phase feeder needs a three-pole device; the ND212T32W is two-pole. It suits single-phase 240V service disconnects, two-wire loads, or corner-grounded and two-pole applications up to 600 Vac. For three-phase work, specify the three-pole NG-frame ND equivalent.
5) What does the Digitrip 310 RMS LSI trip unit let me adjust?
LSI means long time, short time, and instantaneous protection, all electronic rather than thermal-magnetic. That gives you adjustable pickup and delay bands for coordinating with downstream breakers, which is why it gets specified on 1200A feeders. There is no ground fault element in an LSI unit; if the drawing calls for ground fault protection you need an LSIG trip unit instead.
6) Is this breaker a complete unit or just a replacement trip unit?
Complete breaker. The ND212T32W is a full Eaton Series C molded case circuit breaker in the NG frame, ND type, two-pole, with the Digitrip 310 RMS trip unit installed. You are not buying a bare trip module or an interchangeable rating plug.
7) Is the ND212T32W UL Listed for use in a commercial service entrance panel?
It carries a UL Listed marking and is rated 600 Vac, 1200A, 50/60 Hz. Service entrance use also depends on the enclosure or switchboard being suitable for service equipment and on neutral bonding provisions, so match the breaker to the equipment label on the gear it goes into.
8) What exact part number do I order to match an existing Eaton NG-frame ND breaker?
The part number is ND212T32W, an Eaton Series C NG-frame ND type breaker, two-pole, 1200A, Digitrip 310 RMS electronic LSI, supplied without terminals. Frame, pole count, amp rating, and trip type all have to match the unit you are replacing, and the existing lugs may be reusable since none are included here.
9) Will this work on a 50 Hz system for export or generator equipment?
Yes, the breaker is rated 50/60 Hz, so it applies on either 50 Hz or 60 Hz systems at up to 600 Vac.
How fast can I get the B-LINE ND212T32W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE ND212T32W come with a warranty?
Absolutely. The B-LINE ND212T32W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE ND212T32W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE ND212T32W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!