Eaton Series C electronic molded case circuit breaker, R-frame, RDC, Complete breaker, Digitrip 510 RMS, Electronic LSI trip type, Three-pole, 2500A, 600 Vac, 65 kAIC at 480 Vac, 50 kAIC at 600 Vac, Without terminals
RDC325T52W - spec sheet
RDC325T52W - spec sheet
Manufacturer Resources
Product Specs
- Amperage Rating:
- 2500A
- Certifications:
- UL Listed
- Circuit Breaker Frame Type:
- Complete breaker
- Circuit Breaker Type:
- RDC
- Interrupt Rating:
- 65 kAIC at 480 Vac, 50 kAIC at 600 Vac
- Number Of Poles:
- Three-pole
- Product Height:
- 15.5 IN
- Product Length Depth:
- 9.75 IN
- Product Weight:
- 135 LB
- Product Width:
- 15.5 IN
- Terminals:
- Without terminals
- Trip Type:
- Electronic LSI
- Voltage Rating:
- 600 Vac
- Department:
- Electrical
- Product Length:
- 9.75 in
B-LINE RDC325T52W – Frequently Asked Questions
1) Does the Eaton RDC325T52W circuit breaker come with lugs or terminals?
No. The RDC325T52W ships without terminals, so line and load connectors have to be ordered separately to match your conductor size and configuration. On a 2500A R-frame breaker that usually means multiple cable lugs or a bus connection kit per pole, and you need all three poles covered before the breaker can be landed.
2) Is the Eaton RDC325T52W rated for a 600V system?
Yes, it is rated to 600 Vac, with an interrupting rating of 65 kAIC at 480 Vac and 50 kAIC at 600 Vac. Confirm the available fault current at your point of installation stays under 50 kAIC if you are running it at 600 volts.
3) What does the Digitrip 510 RMS LSI trip unit on this Eaton R-frame breaker actually adjust?
LSI means long time, short time and instantaneous protection, all electronic rather than thermal-magnetic. That gives you adjustable pickup and delay bands for coordinating with downstream devices on a 2500A feeder. There is no ground fault element in an LSI unit, so if your service requires ground fault protection it has to come from an LSIG trip unit or a separate relay.
4) Is the RDC325T52W a complete breaker or just a replacement trip unit?
It is a complete breaker: the Eaton Series C R-frame RDC molded case breaker supplied whole, not a frame-only or trip-unit-only order. It weighs 135 lb and measures 15.5 in high by 15.5 in wide by 9.75 in deep, so plan rigging and door clearance before it goes into the gear.
5) What is the exact part number for this Eaton Series C 2500 amp breaker?
The manufacturer part number is RDC325T52W, an Eaton Series C R-frame, three-pole, 2500A, 600 Vac breaker with a Digitrip 510 RMS LSI trip unit and no terminals supplied.
How fast can I get the B-LINE RDC325T52W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE RDC325T52W come with a warranty?
Absolutely. The B-LINE RDC325T52W is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE RDC325T52W?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE RDC325T52W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.