Eaton B-Line series cable support fasteners, Conduit and cable, Flange, 0.012lbs, Flexible conduit/cable fasteners, .06" Min, .13" Max mount size, .375" Min, 0.437" Max cable diameter, Accepts 14/2, 12/2 and 10/2 romex w ground, Zinc plated
Manufacturer Resources
Product Specs
- Application:
- Secures cable along flanges
- Cable Diameter Max:
- .437 in
- Cable Diameter Min:
- .375 in
- Certifications:
- CE
- Mounting Dimensions Max:
- 0.13
- Mounting Dimensions Min:
- 0.06
- Mounting Method:
- Flange
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .012 lb
- Product Width:
- 1 in
- Special Features:
- Accepts 14/2, 12/2 and 10/2 romex with ground
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Flexible conduit/cable fasteners
- Product Details:
- Flexible conduit/cable fasteners
- Product Length:
- 1 in
B-LINE BXS-1011 – Frequently Asked Questions
1) Will the B-Line BXS-1011 clip hold 12/2 romex with ground?
Yes. The BXS-1011 flange clip is sized for 14/2, 12/2 and 10/2 romex with ground, which falls in its .375 to .437 inch cable diameter range. Cable outside that range will either slip or not seat in the clip.
2) What thickness of flange or steel edge does the BXS-1011 snap onto?
It grips flange material from 0.06 up to 0.13 inches thick. That covers light-gauge steel studs, bar joist flanges and similar sheet edges. Thicker structural flange will not accept the clip.
3) Do I need screws or anchors to install these cable clips?
No fasteners are needed. The BXS-1011 is a flange-type clip that snaps directly over the edge of the flange and holds the cable, so there is no drilling, screwing or anchoring in the run.
4) Are the B-Line BXS-1011 clips corrosion resistant for use in a damp mechanical room?
They are zinc plated steel, which handles normal indoor and mechanical-room conditions. For exterior or wash-down areas you want stainless or a coated fastener instead, since zinc plating is a mild-duty finish.
5) What is the part number and how much does one B-Line flange cable clip weigh?
Order it as Eaton B-Line BXS-1011. Each clip weighs .012 lb and measures 1 x 1 x 1 inch, so a box of them adds almost nothing to a run and they travel easily in a pouch.
6) Does the BXS-1011 carry any certification for an institutional spec?
The BXS-1011 flange fastener is CE marked. That is the certification carried on this clip.
How fast can I get the B-LINE BXS-1011 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BXS-1011 come with a warranty?
Absolutely. The B-LINE BXS-1011 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BXS-1011?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BXS-1011 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.