Eaton B-Line series clevis hanger, 1.25" height, 7.724" length, 6.063" width, Steel, Slide rite clevis hanger, Type 1, Zinc chromate finish, 4" pipe size, 5/8-11" rod size
Manufacturer Resources
Product Specs
- Application:
- Design aligned bolt hole for overhead install
- Certifications:
- cUL Listed
- Pipe Size Max:
- 4 in
- Product Height:
- 1.25 in
- Product Length Depth:
- 7.724 in
- Product Weight:
- 1.292 lb
- Product Width:
- 6.063 in
- Department:
- Electrical
- Product Type:
- Type 1
- Product Model:
- Slide rite clevis hanger
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Type 1
- Product Material:
- Steel
B-LINE B3100-4ZN – Frequently Asked Questions
1) What pipe size does the B-Line B3100-4ZN clevis hanger support?
The B3100-4ZN Slide Rite clevis hanger is sized for 4 inch pipe. It is a single-size hanger, so runs of other diameters need the matching size in the B3100 series rather than this part.
2) What size threaded rod does this 4 inch clevis hanger take?
It hangs on 5/8-11 threaded rod. Order the rod, nuts and the overhead attachment separately, they don't come with the hanger.
3) Is the yellow zinc chromate finish on this B-Line hanger okay for damp or outdoor runs?
Yellow zinc chromate over steel is a general indoor corrosion coating. It handles typical mechanical room and plenum conditions, but for wet, exterior or corrosive service you want a hot dip galvanized or stainless clevis hanger instead.
4) What makes a Slide Rite clevis hanger different from a standard clevis?
The bolt hole is aligned by design so the assembly can be made up overhead in one pass, which is the point of the Slide Rite arrangement. A plain clevis usually has you line up the top strap, bottom strap and bolt by hand on the ladder.
5) How much room do I need above the ceiling for this 4 inch clevis hanger?
The hanger measures 1.25 x 7.724 x 6.063 inches, so plan the clearance around those figures plus the rod drop and the pipe itself. In tight plenums that width is what usually decides whether the clevis fits between the pipe and the deck.
6) What does a single B-Line B3100-4ZN hanger weigh for load takeoff?
Each hanger weighs 1.292 lb. Multiply by hanger count when you are figuring dead load on the deck or estimating a pallet for a large pipe run.
7) Which part number do I give my distributor for the 4 inch zinc chromate Slide Rite clevis?
Eaton B-Line part number B3100-4ZN. The B3100 is the Slide Rite series, the 4 is the pipe size and ZN is the yellow zinc chromate finish.
How fast can I get the B-LINE B3100-4ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3100-4ZN come with a warranty?
Absolutely. The B-LINE B3100-4ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3100-4ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3100-4ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.