Eaton B-Line series clevis hanger, 1.5" height, 10.408" length, 10" width, Steel, Slide rite clevis hanger, Type 1, Zinc chromate, 6" pipe size, 3/4-10" rod size
Manufacturer Resources
Product Specs
- Application:
- Design aligned bolt hole for overhead install
- Certifications:
- cUL Listed
- Pipe Size Max:
- 6 in
- Product Height:
- 1.5 in
- Product Length Depth:
- 10.408 in
- Product Weight:
- 2.575 lb
- Product Width:
- 10 in
- Department:
- Electrical
- Product Type:
- Type 1
- Product Model:
- Slide rite clevis hanger
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Type 1
- Product Material:
- Steel
B-LINE B3100F-6ZN – Frequently Asked Questions
1) Can one person install this clevis hanger overhead on a rod?
Yes. The Slide Rite design uses an aligned bolt hole so the two halves line up for an overhead install, and at 2.575 lb it's a one-hand lift on a ladder. The slide feature lets you position the lower strap under the pipe before setting the bolt.
2) Is the yellow zinc chromate finish on this clevis hanger suitable for damp or outdoor locations?
The hanger is steel with a yellow zinc chromate finish, which is a corrosion-resistant plating intended for dry to moderately damp interior service. For wet, chemical, or exterior exposure, specify an electro-galvanized, hot dip galvanized, or stainless version of the clevis hanger instead.
3) Is this B-Line clevis hanger listed for use on a specification job?
It is cUL Listed, and it is a Type 1 hanger, which is the MSS designation for an adjustable clevis. That is the type most mechanical and fire protection drawings call out for horizontal pipe on threaded rod.
4) Should I use a clevis hanger or a split ring for a 6 inch overhead pipe run?
For 6 inch pipe on overhead rod, the adjustable clevis is the normal choice: it carries the load on a bolted two-piece strap and allows vertical adjustment after the pipe is set. Split ring and swivel ring hangers are for smaller diameter lines and don't give you the same adjustment. Use a riser clamp instead if the pipe is vertical, since a clevis supports horizontal runs only.
5) What is the exact part number to order the 6 inch zinc chromate Slide Rite clevis hanger?
Order Eaton B-Line part B3100F-6ZN. The F denotes the Slide Rite version, the 6 is the 6 inch pipe size, and ZN is the yellow zinc chromate finish.
How fast can I get the B-LINE B3100F-6ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3100F-6ZN come with a warranty?
Absolutely. The B-LINE B3100F-6ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3100F-6ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3100F-6ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.