Eaton B-Line series clevis hanger, 1.75" height, 12.938" length, 11" width, Steel, Slide rite clevis hanger, Type 1, Zinc chromate, 8" pipe size, 3/4-10" rod size
Manufacturer Resources
Product Specs
- Application:
- Design aligned bolt hole for overhead install
- Certifications:
- cUL Listed
- Pipe Size Max:
- 8 in
- Product Height:
- 1.75 in
- Product Length Depth:
- 12.938 in
- Product Weight:
- 4.98 lb
- Product Width:
- 11 in
- Department:
- Electrical
- Product Type:
- Type 1
- Product Model:
- Slide rite clevis hanger
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Type 1
- Product Material:
- Steel
B-LINE B3100F-8ZN – Frequently Asked Questions
1) What pipe size does the B-Line B3100F-8ZN clevis hanger fit?
The B3100F-8ZN Slide Rite clevis hanger is sized for 8 inch pipe. It's a single-size hanger, so it won't adapt down to smaller pipe, and an 8 inch nominal run is what the strap geometry is cut for. For other diameters you order the matching size in the same B3100 series rather than shimming this one.
2) What size hanger rod do I need for this 8 inch clevis hanger?
It takes 3/4 inch rod. The rod thread size for the 8 inch Slide Rite clevis hanger is 3/4-10, so you need 3/4 inch threaded rod plus nuts, ordered separately from the hanger itself.
3) Is this clevis hanger UL listed for use in a fire sprinkler or electrical installation?
The B3100F-8ZN carries a cUL Listing. That is the listing recorded for this hanger; if your spec or AHJ calls for a specific standard number beyond the cUL mark, verify against that spec.
4) Is a zinc chromate clevis hanger OK for damp or outdoor pipe runs?
The finish is yellow zinc chromate over steel, which is a corrosion-resistant plating suited to interior and sheltered service. For continuously wet, exterior, or chemically aggressive locations, buyers normally step up to an electro-galvanized or hot dip galvanized clevis instead of a chromate-plated one.
5) Does the B3100F-8ZN come with threaded rod, nuts, or an insulation shield?
What you get is the steel clevis hanger with its clevis bolt and nut. Threaded 3/4 inch rod, rod attachments to the structure (beam clamp, concrete insert, or strut fitting), and any insulation shield or saddle for insulated line are separate items on the order.
6) What is the exact manufacturer part number for the 8 inch yellow zinc B-Line Slide Rite clevis?
Order it as Eaton B-Line B3100F-8ZN. The B3100F is the Slide Rite clevis series, the 8 designates 8 inch pipe, and ZN is the yellow zinc chromate finish.
7) Is a clevis hanger the right choice, or should I use a riser clamp or roller support?
A clevis hanger like the B3100F suspends horizontal pipe from threaded rod off the structure overhead. Use a riser clamp instead where the pipe runs vertically through a floor, and a roller or pipe roll support where the line moves axially with thermal expansion, since a clevis holds the pipe fairly fixed at each hanger point.
How fast can I get the B-LINE B3100F-8ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3100F-8ZN come with a warranty?
Absolutely. The B-LINE B3100F-8ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3100F-8ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3100F-8ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.