B-Line Eaton series clevis han...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$844.84
B-Line Eaton series clevis hanger, 2.5" height, 25.25" length, 23.625" width, Steel, Slide rite clevis hanger, Type 1, Zinc chromate, 18" pipe size, 1

B-Line Eaton series clevis hanger, 2.5" height, 25.25" length, 23.625" width, Steel, Slide rite clevis hanger, Type 1, Zinc chromate, 18" pipe size, 1

(No reviews yet) Write a Review

Model: B3100-18ZN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$844.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series clevis hanger, 2.5" height, 25.25" length, 23.625" width, Steel, Slide rite clevis hanger, Type 1, Zinc chromate, 18" pipe size, 1-8" rod size

Manufacturer Resources

Product Specs

Application:
Design aligned bolt hole for overhead install
Certifications:
cUL Listed
Pipe Size Max:
18 in
Product Height:
2.5 in
Product Length Depth:
25.25 in
Product Weight:
25.42 lb
Product Width:
23.625 in
Department:
Electrical
Product Type:
Type 1
Product Model:
Slide rite clevis hanger
Product Finish:
Yellow zinc chromate
Product Details:
Type 1
Product Material:
Steel
Product Length:
25.25 in

B-LINE B3100-18ZN – Frequently Asked Questions

1) What pipe size does the Eaton B-Line B3100-18ZN clevis hanger fit?
The B3100-18ZN is sized for 18 inch pipe, which is the maximum pipe size for this part number. It is a Type 1 slide rite clevis hanger, so one hanger cradles the pipe and the top strap closes over it. For any smaller line you need the matching smaller size in the B3100 range, not this one.
2) What rod size does this 18 inch B-Line clevis hanger take?
It takes 1 inch threaded rod. The hanger ships without rod, so order the rod, nuts and your overhead attachment (beam clamp, insert or anchor) separately to complete the hang.
3) Is the zinc chromate finish on this clevis hanger OK for outdoor or damp areas?
The finish is yellow zinc chromate over steel. That is a coating for indoor, dry to moderately protected service, typical of mechanical rooms and interior overhead runs. For exterior, wet, or corrosive environments, specify a hot dip galvanized or stainless clevis hanger instead.
4) How much does the 18 inch B3100 clevis hanger weigh, and how big is it?
Each hanger weighs 25.42 lb and measures 25.25 x 23.625 x 2.5 inches. That weight matters twice: it is a two hand lift on a ladder or lift for overhead work, and it adds to the dead load your beam clamp or insert has to carry along with the pipe and contents.
5) Why is a slide rite clevis hanger easier to install overhead than a standard clevis?
The B3100 slide rite design uses an aligned bolt hole so the top strap and lower band line up as you close them, which means one person can get the bolt started overhead instead of fighting to align two loose halves on a ladder. It is built for overhead installation on that basis.
6) Should I use a clevis hanger or a riser clamp for 18 inch pipe?
A clevis hanger like the B3100-18ZN supports horizontal pipe from overhead structure on threaded rod. It does nothing for vertical pipe. If the 18 inch line is running vertically through a floor penetration, you want a riser clamp bearing on the slab instead, not a clevis.
7) Can I order just one B3100-18ZN hanger, or is it sold by the case?
It is a single part number, B3100-18ZN, ordered as individual hangers. On an 18 inch line you will be placing several along the run, so count your spacing and hanger points before ordering, and add rod, nuts and structural attachments for each point.
How fast can I get the B-LINE B3100-18ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3100-18ZN come with a warranty?
Absolutely. The B-LINE B3100-18ZN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3100-18ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3100-18ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!