Eaton B-Line series clevis hanger, 2.875" height, 1" diameter, Steel, Slide rite clevis hanger, Type 1, Plain steel, 1" pipe size, 3/8-16" rod size
Manufacturer Resources
Product Specs
- Application:
- Design aligned bolt hole for overhead install
- Certifications:
- cUL Listed
- Pipe Size Max:
- 1 in
- Product Diameter:
- 1 in
- Product Height:
- 2.875 in
- Product Weight:
- .35 lb
- Department:
- Electrical
- Product Type:
- Type 1
- Product Model:
- Slide rite clevis hanger
- Product Finish:
- Plain
- Product Details:
- Type 1
- Product Material:
- Steel
B-LINE B3100F-1PLN – Frequently Asked Questions
1) What pipe size does the B-Line B3100F-1PLN clevis hanger fit?
The B3100F-1PLN Slide Rite clevis hanger is sized for 1 inch pipe, with a 1 inch nominal diameter opening. Order the matching size for your run rather than forcing an oversize hanger, since a clevis relies on the strap seating around the pipe OD to carry the load.
2) What threaded rod size do I need for this B-Line clevis hanger?
It takes 3/8-16 threaded rod. The rod, nuts and any anchors are separate items, so plan those into the order along with the hangers themselves.
3) Is this clevis hanger electrically listed for conduit support?
The Eaton B-Line B3100F Slide Rite clevis hanger is cUL Listed, which is what inspectors look for when a hanger is supporting conduit on an electrical job rather than plumbing pipe.
4) Is the plain steel finish suitable for outdoor or damp locations?
No. This hanger is plain (uncoated) steel, which is an interior, dry-location part. Plain steel will rust in exterior, wet or corrosive areas, so specify a galvanized or epoxy-coated hanger for those openings instead.
5) How much vertical space does this hanger take up below the structure?
The hanger body measures 2.875 inches in height. Add that to your rod drop when you are laying out a tight ceiling cavity or stacking racks, because the pipe centerline sits below the top of the clevis.
6) What makes the Slide Rite clevis different from a standard clevis hanger when installing overhead?
The Slide Rite design uses an aligned bolt hole so the bolt lines up on its own during an overhead install. On a standard clevis you are fighting to line up the top and bottom straps one-handed over your head; this one is built to take that step out.
7) Is the B3100F a Type 1 hanger under the standard pipe hanger classification?
Yes, it is classified Type 1, the adjustable clevis hanger type used for horizontal pipe and conduit runs supported from a single vertical rod.
How fast can I get the B-LINE B3100F-1PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B3100F-1PLN come with a warranty?
Absolutely. The B-LINE B3100F-1PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B3100F-1PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B3100F-1PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.