Eaton B-Line series conduit support fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.082lbs, 0.5" EMT, Push-type conduit to beam fasteners, .13" Min mount size, .25" Max mount size
Manufacturer Resources
Product Specs
- Application:
- Quickly attaches conduit to beams
- Certifications:
- UL/CUL listed
- Mounting Dimensions Max:
- 0.25
- Mounting Dimensions Min:
- 0.13
- Mounting Method:
- Flange
- Product Category:
- Beams
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .082 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Push-type conduit to beam fasteners
- Product Size:
- 0.5 inch EMT
- Product Details:
- Push-type conduit to beam fasteners
B-LINE BP-12-U-2-4 – Frequently Asked Questions
1) What beam flange thickness will this push-on conduit fastener clip onto?
It grips flange material from 0.13 inch up to 0.25 inch thick. Thinner sheet steel or a heavier structural flange than 1/4 inch is outside that range, and the clip will either fall off or not push on at all. Measure the flange edge before you order a case.
2) Do I need to drill or weld anything to mount conduit to a beam with this clip?
No drilling, no welding, no anchors. The BP-12-U-2-4 is a push-type fastener that clips over the beam flange by hand and holds the 1/2 inch EMT. That is why electricians use them for long runs across exposed steel, where drilling every support point would eat the schedule.
3) Is the B-Line BP-12-U-2-4 conduit fastener UL listed for electrical work?
Yes, it carries a UL/CUL listing, which is what an institutional or government inspector will look for on an exposed conduit run. That covers both US and Canadian jobs.
4) Can I use this B-Line push-on fastener on a purlin or bar joist instead of a beam flange?
It works on any flange edge between 0.13 and 0.25 inch thick, which is the real constraint rather than what the member is called. Bar joist angles and purlin flanges within that thickness take it fine; anything thicker needs a bolted beam clamp instead.
5) Will this hold 1/2 inch rigid conduit or just EMT?
It is specified for 1/2 inch EMT. Rigid and IMC have different outside diameters than EMT in the same trade size, so a clip cut for EMT is not the right choice for them. Use a fastener rated for the raceway type you are actually installing.
How fast can I get the B-LINE BP-12-U-2-4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BP-12-U-2-4 come with a warranty?
Absolutely. The B-LINE BP-12-U-2-4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BP-12-U-2-4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BP-12-U-2-4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.