Eaton B-Line series datacomm and low voltage support fasteners, 360° rotation, Cable to t-bar fastener, Ceiling mount, 1-5/16" hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Hook Size:
- 1.31 in
- Load Capacity:
- 30 lb
- Number Of J Hooks:
- 1
- Product Height:
- 3.62 in
- Product Length Depth:
- 1.69 in
- Product Weight:
- .31 lb
- Product Width:
- 1.62 in
- Special Features:
- Ceiling mount
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Other Fasteners
- Product Type:
- Cable to t-bar fastener
- Product Finish:
- Pre-galvanized
- Product Details:
- Cable to t-bar fastener
- Product Material:
- Steel
B-LINE BCH21-A28 – Frequently Asked Questions
1) Can I attach this J-hook directly to the T-bar of a drop ceiling grid?
That is exactly what it is built for. The BCH21-A28 is a cable-to-t-bar fastener that clips onto suspended ceiling grid, so you are not drilling structure or shooting anchors to run low voltage above a tile ceiling. It is a ceiling mount part, and the hook rotates a full 360 degrees so you can aim the cable run any direction off the grid line.
2) Is the B-Line BCH21-A28 cable hook UL listed for low voltage cable support?
It carries a UL/CUL listing. For a datacomm or low voltage install in a commercial building, that is usually what the inspector and the spec are asking for when independent cable support above the ceiling is called out.
3) Will a pre-galvanized steel J-hook hold up in a warehouse or parking garage?
The BCH21-A28 is pre-galvanized steel, which is a dry indoor-environment finish. It is fine above ceilings, in offices, classrooms, and conditioned back-of-house space. For wash-down areas, exterior soffits, coastal exposure, or anywhere it gets wet, specify a stainless or hot-dip galvanized hook instead.
4) Does the BCH21-A28 come with more than one hook per fastener?
One J-hook per fastener. If you need to keep separate cable systems apart, say data on one side and fire alarm or AV on the other, order multiple pieces or move to a multi-hook assembly. Each unit is a single 1-5/16 inch hook on a t-bar clip.
5) What does the 360 degree rotation on this t-bar cable hook actually do for me?
It lets you set the hook direction after the clip is on the grid. On a jobsite where the cable path crosses the ceiling tee at an angle, or where you are pulling toward a different wall than the grid runs, you rotate the hook to line up with the run instead of repositioning the clip. Saves rework when the pull path changes mid-install.
How fast can I get the B-LINE BCH21-A28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH21-A28 come with a warranty?
Absolutely. The B-LINE BCH21-A28 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH21-A28?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH21-A28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.