Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 5/16" Min flange thickness, 1/2" Max flange thickness, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Hook Size:
- 2 in
- Load Capacity:
- 30 lb
- Mounting Dimensions Max:
- 1/2"
- Mounting Dimensions Min:
- 5/16"
- Number Of J Hooks:
- 1
- Product Height:
- 6.08 in
- Product Length Depth:
- 2.212 in
- Product Weight:
- .486 lb
- Product Width:
- 1.875 in
- Special Features:
- Beam mount
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Other Fasteners
- Product Type:
- Cable to beam fastener
- Product Finish:
- Pre-galvanized
- Product Details:
- Cable to beam fastener
- Product Material:
- Steel
B-LINE BCH32-U-5-8 – Frequently Asked Questions
1) Will the B-Line BCH32-U-5-8 J-hook clamp onto my beam flange?
It grips flanges from 5/16 inch up to 1/2 inch thick. Thinner or thicker flange than that range and the beam clamp won't seat properly, so measure the flange edge before ordering. No drilling or welding is needed, the fastener clamps directly to the beam.
2) How much cable can a 2 inch J-hook beam clamp hold?
The BCH32-U-5-8 carries a 30 lb load capacity in the 2 inch hook. That is the limit for the bundle sitting in the hook, so on long runs of Cat6 or coax, space supports so no single hook exceeds it.
3) Is this J-hook assembly UL listed for low voltage cable support?
Yes, the Eaton B-Line BCH32-U-5-8 cable to beam fastener is UL/CUL listed. That is usually what an institutional or MRO spec calls for on datacomm and low voltage support in a commercial building.
4) How many cable hooks come on the BCH32-U-5-8?
One J-hook per unit, sized at 2 inches. If you are running separate bundles that have to stay segregated, order one fastener per bundle rather than stacking cable in a single hook.
5) How much clearance below the beam does this cable hanger need?
The assembly measures 6.08 inches high, 1.875 inches wide and 2.212 inches deep, and weighs about .486 lb. Worth checking against tight plenum space above a ceiling grid before you commit to a run.
6) Do I need any anchors or threaded rod to install this beam clamp?
No. The BCH32-U-5-8 is a one-piece cable to beam fastener, hook and clamp together, so it attaches straight to the structural steel flange. No rod, no anchors, no drilling into the deck.
7) Can I use this J-hook in a damp or unconditioned space like a parking garage?
The fastener is steel with a pre-galvanized finish, which handles ordinary indoor and unconditioned interior conditions. For direct weather exposure or corrosive environments, a hot-dip galvanized or stainless support is the better call.
How fast can I get the B-LINE BCH32-U-5-8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH32-U-5-8 come with a warranty?
Absolutely. The B-LINE BCH32-U-5-8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH32-U-5-8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH32-U-5-8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.