B-Line Eaton series data and l...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,451.10
Image coming soon

B-Line Eaton series data and low support fasteners, Cable to beam fastener, Beam mount, 9/16" Min flange thickness, 3/4" Max flange thickness, 2" Hoo

(No reviews yet) Write a Review

Model: BCH32-U-9-12

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,451.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series datacomm and low voltage support fasteners, Cable to beam fastener, Beam mount, 9/16" Min flange thickness, 3/4" Max flange thickness, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel

Manufacturer Resources

Product Specs

Certifications:
UL/CUL listed
Hook Size:
2 in
Load Capacity:
30 lb
Mounting Dimensions Max:
3/4"
Mounting Dimensions Min:
9/16"
Number Of J Hooks:
1
Product Height:
3.62 in
Product Length Depth:
1.69 in
Product Weight:
.48 lb
Product Width:
1.62 in
Special Features:
Beam mount
Department:
Electrical
Product Group:
Fasteners
Product Subgroup:
Other Fasteners
Product Type:
Cable to beam fastener
Product Finish:
Pre-galvanized
Product Details:
Cable to beam fastener
Product Material:
Steel

B-LINE BCH32-U-9-12 – Frequently Asked Questions

1) What beam flange thickness does the B-Line BCH32-U-9-12 J-hook clamp fit?
The BCH32-U-9-12 cable-to-beam fastener clamps onto flanges from 9/16 inch up to 3/4 inch thick. Thinner or thicker flanges need a different clamp size in the series, so measure the flange edge on the beam or bar joist before ordering a run of these.
2) How much cable can a 2 inch B-Line J-hook beam clamp hold?
Rated load is 30 lb per hook, with a 2 inch hook opening. That governs how many Cat6 or low voltage runs you can lay in one hook, and it is a per-hook limit, not a per-run limit, so space additional hooks along the beam rather than overfilling one.
3) Do I need to drill or weld to install this cable hook on a steel beam?
No drilling, no welding, no anchors. The BCH32-U-9-12 is a beam-mount clamp that grips the flange edge directly, which is why it is the usual pick for retrofitting cable tray-free runs in an existing steel structure. The assembly is one J-hook on one clamp, so each unit supports a single point in the run.
4) Is the B-Line BCH32-U-9-12 cable hook UL listed for low voltage cable support?
It is UL/CUL listed. That matters for inspected commercial and institutional work where the cable support method has to be a listed product, and it is the reason this beats improvised wire or tie-wire support above a ceiling.
5) How much clearance do I need below the beam for this J-hook?
The assembly measures 3.62 inches high, 1.62 inches wide, and 1.69 inches deep, and weighs .48 lb. Use the height figure when you are checking the gap between the beam flange and the ceiling grid or duct below, since the hook has to clear both the cable bundle and anything running under it.
6) Can I run electrical power cable in this B-Line hook instead of data cable?
It is built as a datacomm and low voltage support fastener, so the intended contents are network, coax, fiber, and other low voltage bundles. Power branch circuits have their own support and securing rules and should go in conduit or a listed raceway support rather than an open J-hook.
7) Is a pre-galvanized steel J-hook OK for a damp or unconditioned space?
The hook and clamp are steel with a pre-galvanized finish, which suits dry interior and typical unconditioned interior spaces such as plenums, warehouses, and parking structure soffits. For direct exterior exposure or corrosive environments, specify a stainless or hot-dip galvanized support instead.
How fast can I get the B-LINE BCH32-U-9-12 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH32-U-9-12 come with a warranty?
Absolutely. The B-LINE BCH32-U-9-12 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH32-U-9-12?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH32-U-9-12 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!