You may also like
B-Line Eaton series data and low support fasteners, Hole size .265" diameter, Angle bracket cable fastener, Structural mount, 2" Hook, 1 J-hook, Pre-
Model: BLN-BCH32-RB
Eaton B-Line series datacomm and low voltage support fasteners, Hole size .265" diameter, Angle bracket cable fastener, Structural mount, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs,...
B-LINE
$2,160.73
B-Line Eaton series data and low support fasteners, Hole size .265" diameter, Angle bracket cable fastener, Structural mount, 3/4" Hook, 1 J-hook, Pr
Model: BLN-BCH21-RB
Eaton B-Line series datacomm and low voltage support fasteners, Hole size .265" diameter, Angle bracket cable fastener, Structural mount, 3/4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs,...
B-LINE
$1,907.44
B-Line Eaton series data and low support fasteners, Direct attachment to structures, .265 diameter hole size, Angle bracket cable fastener, Structura
Model: BLN-BCH12-RB
Eaton B-Line series datacomm and low voltage support fasteners, Direct attachment to structures, .265 diameter hole size, Angle bracket cable fastener, Structural mount, 1-3/4" J-hook,...
B-LINE
$1,147.59
B-Line Eaton series data and low support fasteners, Cable to floor support fastener, Pipe mount, 1" Diameter rod, 1-5/16" Hook, 1 J-hook, Pre-galvani
Model: BLN-BCH21-L1410
Eaton B-Line series datacomm and low voltage support fasteners, Cable to floor support fastener, Pipe mount, 1" Diameter rod, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
B-LINE
$1,660.00
B-Line Eaton series data and low support fasteners, Cable to wire and rod fastener, Cable mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacit
Model: BLN-BCH21-W2
Eaton B-Line series datacomm and low voltage support fasteners, Cable to wire and rod fastener, Cable mount, 1-5/16" Hook, 1 J-hook, Pre-galvanized, Load capacity of 25 lbs, Steel
B-LINE
$1,646.36
Eaton B-Line series datacomm and low voltage support fasteners, Hole size .265" diameter, Angle bracket cable fastener, Structural mount, 4" Hook, 1 J-hook, Pre-galvanized, Load capacity of 30 lbs, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Hook Size:
- 4 in
- Load Capacity:
- 30 lb
- Number Of J Hooks:
- 1
- Product Height:
- 7.21 in
- Product Length Depth:
- 4.223 in
- Product Weight:
- .88 lb
- Product Width:
- 2.25 in
- Special Features:
- Structural mount
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Angle bracket cable fastener
- Product Finish:
- Pre-galvanized
- Product Details:
- Angle bracket cable fastener
- Product Material:
- Steel
B-LINE BCH64-RB – Frequently Asked Questions
1) How much cable can a B-Line BCH64-RB 4 inch J-hook actually hold?
The BCH64-RB is rated for 30 lb of load on its single 4 inch hook. That 4 inch hook opening is the size most installers use for bundles of Cat5e/Cat6 or coax runs, and the 30 lb figure is the limit for the whole assembly, cable plus any strain on the hook, not per cable.
2) What does the angle bracket on the BCH64-RB mount to?
It is a structural mount fastener, meaning the steel angle bracket bolts or screws to building structure, beams, wall studs, purlins, channel, rather than clipping to a rod or flange. The mounting hole is .265 inch diameter, which takes a 1/4 inch bolt or screw with clearance.
3) Is the BCH64-RB J-hook UL listed for low voltage cable support?
Yes, it carries a UL/CUL listing. That listing is what inspectors and institutional specs typically ask for on independent datacomm and low voltage cable support, so it satisfies a drawing calling for listed cable support hardware.
4) Is a pre-galvanized J-hook OK for an outdoor or damp install?
The BCH64-RB is pre-galvanized steel, which is the standard finish for dry interior work: plenum spaces, above ceilings, telecom rooms, warehouse ceilings. Pre-galvanized coating is thinner than hot-dip and not intended for exterior exposure, wash-down areas, or corrosive environments. For those conditions look for a hot-dip galvanized or stainless version of the hook instead.
5) Do I get the mounting bolt with the BCH64-RB, or do I supply it?
What you receive is the angle bracket with one 4 inch J-hook attached. The anchor or screw that fastens the bracket to structure is a separate item, chosen to suit what you are mounting to (concrete anchor, lag into wood, machine bolt through steel). Size it to the .265 inch mounting hole.
How fast can I get the B-LINE BCH64-RB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH64-RB come with a warranty?
Absolutely. The B-LINE BCH64-RB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH64-RB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH64-RB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.