Eaton B-Line series datacomm and low voltage support fasteners, W6 series attaches to 3/8" plain or threaded rod, Cable to wire and rod fastener, Cable mount, 2" Hook, 1 J-hook, Pre-galvanized, Load capacity of 25 lbs, Steel
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Hook Size:
- 2 in
- Load Capacity:
- 25 lb
- Number Of J Hooks:
- 1
- Product Height:
- 5.372 in
- Product Length Depth:
- 2.684 in
- Product Weight:
- .235 lb
- Product Width:
- 1.62 in
- Special Features:
- Cable mount
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Other Fasteners
- Product Type:
- Cable to wire and rod fastener
- Product Finish:
- Pre-galvanized
- Product Details:
- Cable to wire and rod fastener
- Product Material:
- Steel
B-LINE BCH32-W6 – Frequently Asked Questions
1) Will the B-Line BCH32-W6 J-hook mount to 3/8 inch threaded rod?
Yes. The W6 attachment on the BCH32-W6 clamps to 3/8 inch plain or threaded rod, so it works on existing trapeze drops or dedicated rod hangers without adding a beam clamp or strut. It is a cable-to-wire-and-rod fastener, so the same W6 body also grabs support wire.
2) How much cable can a 2 inch B-Line BCH32 J-hook actually hold?
The hook is a 2 inch size with a rated load capacity of 25 lb. That is the mechanical limit; your real bundle size is set by whatever cable fill your spec allows in a 2 inch hook. One J-hook per assembly.
3) Is this J-hook OK for open plenum ceilings on a low voltage job?
The BCH32-W6 is UL/CUL listed and made of pre-galvanized steel, which is the usual combination inspectors look for on datacomm and low voltage cable support above a ceiling. It is built for independent cable support, not for hanging cable off the ceiling grid wires that hold the tiles.
4) Can I run power circuits in a B-Line BCH32-W6 J-hook?
No. This is a datacomm and low voltage support fastener, intended for communications and low voltage cable bundles. Power wiring needs its own raceway or support method per code, not a cable hook.
5) Do I need any extra hardware to install the BCH32-W6?
The W6 attachment is integral to the fastener, so nothing extra is needed to make the connection once you have 3/8 inch rod or support wire in place. You supply the rod, wire, and whatever anchors that rod back to structure.
6) Does the pre-galvanized finish hold up in a damp mechanical room?
Pre-galvanized steel handles normal indoor and interstitial ceiling conditions, including typical mechanical spaces. For exterior, wash-down, or corrosive environments, specify a hot-dip or stainless cable support instead.
How fast can I get the B-LINE BCH32-W6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BCH32-W6 come with a warranty?
Absolutely. The B-LINE BCH32-W6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BCH32-W6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BCH32-W6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.