B-Line Eaton series double sided 18 inch shelf width distribution , 96" height, 31.62" length, 18" width, 2 vertical with 10 shelves, ASTM A36 structu

It is configured with 2 verticals and 10 shelves, with an 18 inch shelf width. That gives you ten shelf positions across a single bay for mounting terminal blocks. If you need more capacity you add bays rather than shelves.

It weighs 135 lb. That is a two-person lift and set at minimum, and with a 96 inch height you want it anchored before loading any terminal blocks or cable.

The B-Line SB60209602TG is built to support terminal blocks for central cross connects. Double sided means you terminate and cross connect from both faces of the frame rather than one, which is what you want in a main cross connect or central office style room where field and equipment sides are split. Single sided frames set against a wall handle the same terminal blocks but give you access from one face only.

Order Eaton B-Line part number SB60209602TG. That single model covers the configuration: double sided, 96 inch height, 31.62 inch depth, 18 inch width, 2 verticals, 10 shelves. There are no finish or size options to specify.

The frame footprint is 31.62 inches by 18 inches. Because it is double sided, you need working clearance on both faces, not just one, so do not plan on setting it against a wall. Height is 96 inches.

Steel construction, specifically ASTM A36 structural steel, finished in Telco gray powder coat. The gray powder coat matches standard telecom room equipment, so it blends with existing frames and racks in a central office or MDF.

Certifications are listed as Not Applicable for the SB60209602TG. It is a structural steel support frame for terminal blocks, not an electrical device, so it carries no UL or similar listing.