B-Line Eaton series double sided 18 inch shelf width distribution , 96" height, 31.62" length, 18" width, 4 vertical with 10 shelves, ASTM A36 structu

This frame supports terminal blocks for central cross connects. Double sided means blocks mount on both faces of the frame, so you can terminate incoming cable on one side and distribution on the other and jumper between them. That doubles termination density per square foot of floor compared with a single sided frame against a wall, but it has to stand free with working clearance on both sides.

253 pounds empty, before any terminal blocks, shelves loading or cable. That is a two-person or mechanical-lift set, and on a raised floor you should check the pedestal and panel rating for a concentrated 253 pound base load plus cable weight. The steel construction is what drives the number.

Four verticals with 10 shelves, in an 18 inch shelf width. The vertical count sets how many bays of terminal blocks you can run across the 31.62 inch depth, and the 10 shelves are the mounting levels up the 96 inch height. If your block count needs more levels or more width, you are looking at a different configuration in the series rather than adding to this one.

ASTM A36 structural steel with a Telco gray powder coat. A36 is a carbon structural grade, so the powder coat is what handles corrosion. That is fine for indoor conditioned or lightly conditioned equipment rooms. For damp, coastal or outdoor exposure you want a hot-dip galvanized or stainless support product instead.

Yes. Eaton B-Line part number SB60209604TG is the 96 inch double sided universal distribution frame with 18 inch shelf width, four verticals and 10 shelves. Quote it by that MPN to get this exact height, depth and shelf configuration, since the series covers several frame sizes under similar numbers.