B-Line Eaton series double sided 18 inch shelf width distribution , 96" height, 31.62" length, 18" width, 9 vertical with 10 shelves, ASTM A36 structu

It weighs 548 lb bare, before any terminal blocks, cross connect wire, or shelf loading. Over an 18 by 31.62 inch footprint that is a concentrated point load, so on a raised access floor or a wood framed structure get the loading checked; on a slab it is not usually an issue. Plan for mechanical handling, not two people and a dolly.

This frame supports terminal blocks for central cross connects, and the double sided build lets you mount and terminate from both faces. That means it needs free access front and back, so it suits an island position in the middle of a telecom or MDF room. If the frame has to sit tight against a wall, a single sided frame is the right choice, because half of a double sided frame's capacity would be unreachable.

The frame is configured with 9 verticals and 10 shelves across its 96 inch height. Count your terminal block footprint against that shelf count before ordering; the shelf width is 18 inches, matching the frame width, so blocks deeper than that will overhang.

Order Eaton B-Line model SB60209609TG. That part number carries the specific configuration: double sided, 18 inch shelf width, 96 inch height, 31.62 inch length, 9 verticals with 10 shelves.

Construction is ASTM A36 structural steel with a Telco gray powder coat. That is a standard indoor telecom finish, appropriate for conditioned and normally dry equipment rooms. Powder coat over bare structural steel is not a weatherproof or corrosion resistant system, so it is not intended for outdoor, wash down, or high humidity locations.

Yes, the finish is Telco gray powder coat, the common color for central office and MDF hardware, so it will read consistently alongside existing Telco gray racks, ladder rack, and frames in the same room. Exact shade matching between manufacturers is never guaranteed, but the color family is the standard one.