B-Line Eaton series double sided 24 inch shelf width distribution , 108" height, 37.62" length, 24" width, 9 vertical with 12 shelves, ASTM A36 struct

714.247 lb for the frame itself, before any terminal blocks, cable or cross connects go on it. That is a real structural load on a raised floor, so it wants to sit on slab or on floor tiles rated for the point loads under its base. Plan on mechanical handling and more than one person for placement.

It is the floor-standing steel skeleton that supports terminal blocks for central cross connects in a telecom or MDF room. Double sided means blocks and cross-connect fields mount on both faces of the 9 verticals, so you get twice the termination capacity in the same footprint and you work the frame from both sides. That makes clearance on both faces a requirement, not a nicety, when you lay out the room.

Nine verticals and twelve shelves, with a 24 inch shelf width. That is the configuration as supplied, so count your termination fields against twelve shelves before ordering rather than assuming you can add more later.

Double sided, like the SB60310809TG, doubles termination capacity per linear foot of floor and is the usual choice for a central cross connect field where the frame stands free in the room. Single sided is the choice when the frame has to go against a wall, because you can never reach the back face. If one long wall is your only available space, a double sided frame wastes half its capacity.

Order it as Eaton B-Line SB60310809TG. That single manufacturer part number covers the 108 inch high, 24 inch wide, double sided frame with 9 verticals and 12 shelves in Telco gray.

Steel construction, specifically ASTM A36 structural steel, finished in Telco gray powder coat. That is the standard grey used through central office and telecom equipment rooms, so it matches existing frames and racks in most MDF spaces.