B-Line Eaton series double sided 24 inch shelf width distribution , 84" height, 37.62" length, 24" width, 4 vertical with 8 shelves, ASTM A36 structur

The SB60308404TG frame stands 84 inches high, 37.62 inches long (depth) and 24 inches wide. Plan floor space and door clearances around the 37.62 inch dimension, since that is the largest footprint measurement, and confirm you have 84 inches of vertical clearance under any overhead cable tray or ceiling grid.

This one is built to support terminal blocks for central cross connects, which is the classic telco MDF/IDF application. Double sided means you terminate and cross connect from both faces of the frame, so one footprint carries roughly twice the block capacity of a single sided frame. It is a cross connect field, not an EIA rack for rack mount electronics.

No. It is a universal distribution frame for terminal blocks and central cross connects, with eight shelves rather than punched EIA rack rails. If you need rack-mount active equipment, order a rack rather than this frame, and use the frame alongside it for the cross connect field.

Four verticals with eight shelves, at a 24 inch shelf width. The four verticals carry the load and the eight shelf positions spread across the 84 inch height give you the block-mounting real estate on both sides.

Being a double sided frame, both faces are working surfaces, so it needs aisle access front and back. Set it out in the room, not tight to a wall. Allow for the 37.62 inch depth plus service clearance on each of the two sides you will be terminating from.

Eaton B-Line part number SB60308404TG. That single model covers the configuration described: 84 inch height, 37.62 inch depth, 24 inch width, four verticals, eight shelves, Telco gray.

Steel construction, specifically ASTM A36 structural steel, finished in Telco gray powder coat. A36 is the standard structural carbon steel grade, so this is a fabricated structural frame rather than light formed sheet, and the powder coat suits conditioned indoor equipment rooms.