B-Line Eaton series double sided 24 inch shelf width distribution , 84" height, 37.62" length, 24" width, 7 vertical with 8 shelves, ASTM A36 structur

The SB60308407TG frame stands 84 inches high, 37.62 inches in length/depth, and 24 inches wide. Plan your floor space and, just as important, your door and elevator clearance around the 84 inch height before it arrives, since this is a welded/bolted floor-standing frame and not something you shorten on site.

It weighs 433.318 lb bare, before any terminal blocks, cross connect wire, or cable are loaded on. On a raised floor that load needs to land on stringers or pedestals rather than free-standing floor tiles, and in a retrofit telecom room it is worth confirming the slab or deck loading with whoever holds the structural drawings. The frame is steel throughout.

This is a universal distribution frame built to support terminal blocks for central cross connects, with 7 verticals and 8 shelves. Double sided means it mounts blocks on both faces, so it belongs in the middle of a room where you can walk both sides and it roughly doubles termination capacity per square foot of floor. A single sided frame is the right call when the frame has to sit against a wall, because you lose access to the back face entirely.

Seven verticals and eight shelves, at a 24 inch shelf width. That fixes your block layout: capacity is counted in shelf positions across 24 inches, so lay out your terminal block footprint against that before you order, rather than assuming you can add shelf levels later.

ASTM A36 structural steel. That is the common carbon structural grade used for weight-bearing frame members, which is what lets the frame carry fully loaded blocks and cable over an 84 inch height without relying on the wall for support.

Telco gray powder coat over the steel, which is the standard finish on central office and telecom distribution ironwork, so it lines up visually with existing gray frames and ladder rack in the same room. Powder coat also takes labels and block markings better than bare or plated steel.