B-Line Eaton series double sided 24 inch shelf width distribution , 96" height, 37.62" length, 24" width, 3 vertical with 10 shelves, ASTM A36 structu

It is a floor standing steel frame that supports terminal blocks for central cross connects. Double sided means it is populated from both faces, so it is meant to sit out in the room with working access front and back, not pushed against a wall like a single sided wall-mounted frame. This one is configured with 3 verticals carrying 10 shelves for block mounting.

The frame footprint works out from a 37.62 inch length and 24 inch width. Because it is double sided and terminates blocks on both faces, you need working aisle on both sides rather than one, so lay out the room with clearance front and rear plus whatever your local electrical code requires for working space in front of equipment.

Shipping weight is 220.678 lb for the frame. That is a two-person minimum handling job, and because it is a double sided frame at 96 inches tall loaded on both faces, the floor anchorage matters more than the dead weight. Budget for mechanical handling to the room and a crew of two or more to stand and anchor it.

This configuration is built with 3 verticals and 10 shelves, at a 24 inch shelf width. If your cross connect count needs more shelf positions or a different shelf width, that is a different frame part number in the B-Line series rather than an add-on to this one.

Construction is ASTM A36 structural steel finished in Telco gray, which is the standard finish for central office and telecom equipment rooms so it matches adjacent racks and frames. It is a painted steel frame intended for conditioned indoor equipment rooms, not an outdoor or wash-down enclosure.

Specify Eaton B-Line SB60309603TG for the 96 inch high, double sided, 24 inch shelf width frame with 3 verticals and 10 shelves in Telco gray. Height, shelf width and shelf count all change the part number within the series, so match those three against the frames already in your row before you order.