B-Line Eaton series double sided 24 inch shelf width distribution , 96" height, 37.62" length, 24" width, 9 vertical with 10 shelves, ASTM A36 structu

The frame stands 96 inches high, 37.62 inches long, and 24 inches wide. The 24 inch figure is the shelf width, and because it's a double sided frame you need clear access from both sides, so plan the floor space around it rather than pushing it against a wall.

Shipping and installed weight is 642.991 lb for the frame alone, before any terminal blocks, cross-connect wire, or cable. On a raised floor that is a point-load question worth checking with the floor manufacturer, and it is well past a two-person lift, so plan on rigging or a pallet jack to get it into the room.

It supports terminal blocks for central cross connects. In practice it's the backbone frame in a telecom or MDF room where incoming and outgoing pairs terminate and get jumpered together. Double sided means blocks mount on both faces, so you roughly double the termination capacity in the same 37.62 inch footprint compared with a single sided frame, at the cost of needing working room front and back.

The configuration is 9 vertical with 10 shelves. That's nine vertical uprights carrying ten shelf levels across the 96 inch height, which is what sets how many terminal blocks you can lay out per side.

Construction is ASTM A36 structural steel with a Telco gray powder coat, the standard finish in central office and telecom equipment rooms, so it matches existing distribution frames and relay racks in the same space.

Order Eaton B-Line part number SB60309609TG. That number covers the double sided universal distribution frame, 96 inch height, 24 inch shelf width, 9 vertical with 10 shelves, in Telco gray.

What ships is the frame itself, steel with the Telco gray powder coat, in the 9 vertical and 10 shelf configuration. Terminal blocks, protector modules, jumper troughs, and cross-connect wire are separate items chosen to suit the block type your cross connects use.