B-Line Eaton series double sided 30 inch shelf width distribution , 120" height, 43.62" length, 30" width, 8 vertical with 13 shelves, ASTM A36 struct

This Eaton B-Line frame is a double sided universal distribution frame built to support terminal blocks for central cross connects. Double sided means you mount and terminate blocks on both faces, which roughly doubles block capacity in the same floor footprint, but it also means you need working clearance on both sides, not just the front. If you can only get at one face (frame set against a wall), a single sided frame is the correct choice.

Eight verticals with 13 shelves, at a 30 inch shelf width. That gives you 13 shelf levels of terminal block real estate across the frame's 43.62 inch length, on both faces. If your cross-connect count needs more than that, you add frame sections rather than stacking higher, since the uprights are already at 120 inches.

Construction is ASTM A36 structural steel with a Telco gray powder coat. A36 is the standard hot-rolled structural carbon steel grade, so this is a welded/bolted structural frame rather than light sheet metal. The powder coat is a dry-interior finish for telecom and equipment rooms, not a galvanized or outdoor-rated coating, so keep it out of wet or corrosive locations.

Order Eaton B-Line part number SB60412008TG. That number covers the double sided configuration at 30 inch shelf width, 120 inch height, 43.62 inch length, 8 verticals with 13 shelves, in Telco gray. It is a single configuration, so there are no finish or size options to choose on the order.

No agency certification is carried on the SB60412008TG. What you can hold it to on a submittal is the material standard: the frame is built from ASTM A36 structural steel. If your specification requires a listed or labeled support structure, this frame will not satisfy that line item.